شما هنوز به سیستم وارد نشده اید.

#1 2016-02-28 13:30:48

ehsan_faal
عضو
از : تهران
ثبت شده: 2015-10-02
ارسال ها: 270

اشتهای بالای Xorg در مصرف CPU

دوستان سلام.
حدود یکی دو هفته ای هست که با این مشکل مواجهم.
وقتی که دارم با سیستم کار میکنم و حتی کرومیوم با چندتا تب هم بازه اونقدری CPU مصرف نمیشه که وقتی برای دانلود شبانه سیستم رو LOCK میکنم،
به محض lock شدن سیستم صدای فن شروع میشه و تا میام ببینم چه خبره میبینم که توی چند ثانیه اول بعد از unlock کردن ترمینال هم باز نمیشه و بعدش هم که باز میشه میبینم Xorg-server در صدر مواردی هست که بر اساس درصد CPU مرتب شدن.
نمیدونم باید چه خروجی هایی رو بذارم، علی الحساب چیزایی که فکر میکنم ممکنه مفید باشند رو میذارم:

[0:ehsan@manjaro:12:28:14:~]$
>>>pacman -Ss xorg-server
extra/xorg-server 1.17.4-2 (xorg) [installed]
    Xorg X server
extra/xorg-server-common 1.17.4-2 [installed]
    Xorg server common files
extra/xorg-server-devel 1.17.4-2
    Development files for the X.Org X server
extra/xorg-server-utils 7.6-4 [installed]
    Transition package depending on xorg server utilities
extra/xorg-server-xdmx 1.17.4-2
    Distributed Multihead X Server and utilities
extra/xorg-server-xephyr 1.17.4-2
    A nested X server that runs as an X application
extra/xorg-server-xnest 1.17.4-2
    A nested X server that runs as an X application
extra/xorg-server-xvfb 1.17.4-2
    Virtual framebuffer X server
extra/xorg-server-xwayland 1.17.4-2
    run X clients under wayland
[0:ehsan@manjaro:12:28:23:~]$
>>>cat /var/log/Xorg.0.log
[    24.015] 
X.Org X Server 1.17.4
Release Date: 2015-10-28
[    24.015] X Protocol Version 11, Revision 0
[    24.015] Build Operating System: Linux 4.2.5-1-ARCH x86_64 
[    24.015] Current Operating System: Linux manjaro 4.1.18-1-MANJARO #1 SMP PREEMPT Tue Feb 16 23:38:34 UTC 2016 x86_64
[    24.015] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1-x86_64 root=UUID=e75bfcb5-5e83-4a61-a845-ccdccff9eb7c rw quiet
[    24.015] Build Date: 01 November 2015  10:36:50AM
[    24.015]  
[    24.016] Current version of pixman: 0.34.0
[    24.016] 	Before reporting problems, check http://wiki.x.org
	to make sure that you have the latest version.
[    24.016] Markers: (--) probed, (**) from config file, (==) default setting,
	(++) from command line, (!!) notice, (II) informational,
	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    24.016] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 28 11:56:28 2016
[    24.042] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    24.042] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    24.084] (==) No Layout section.  Using the first Screen section.
[    24.084] (==) No screen section available. Using defaults.
[    24.084] (**) |-->Screen "Default Screen Section" (0)
[    24.084] (**) |   |-->Monitor "<default monitor>"
[    24.143] (==) No monitor specified for screen "Default Screen Section".
	Using a default monitor configuration.
[    24.143] (==) Automatically adding devices
[    24.143] (==) Automatically enabling devices
[    24.143] (==) Automatically adding GPU devices
[    24.716] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[    24.716] 	Entry deleted from font path.
[    24.716] 	(Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[    24.717] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[    24.717] 	Entry deleted from font path.
[    24.717] 	(Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[    24.717] (==) FontPath set to:
	/usr/share/fonts/misc/,
	/usr/share/fonts/TTF/,
	/usr/share/fonts/OTF/,
	/usr/share/fonts/Type1/
[    24.717] (==) ModulePath set to "/usr/lib/xorg/modules"
[    24.717] (II) The server relies on udev to provide the list of input devices.
	If no devices become available, reconfigure udev or disable AutoAddDevices.
[    24.851] (II) Loader magic: 0x817d60
[    24.851] (II) Module ABI versions:
[    24.851] 	X.Org ANSI C Emulation: 0.4
[    24.851] 	X.Org Video Driver: 19.0
[    24.851] 	X.Org XInput driver : 21.1
[    24.851] 	X.Org Server Extension : 9.0
[    24.854] (EE) systemd-logind: failed to get session: PID 627 does not belong to any known session
[    24.855] (II) xfree86: Adding drm device (/dev/dri/card0)
[    24.858] (--) PCI:*(0:0:2:0) 8086:0166:104d:90b8 rev 9, Mem @ 0xd1000000/4194304, 0xc0000000/268435456, I/O @ 0x00004000/64
[    24.858] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[    24.858] (II) LoadModule: "glx"
[    24.904] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[    25.877] (II) Module glx: vendor="X.Org Foundation"
[    25.877] 	compiled for 1.17.4, module version = 1.0.0
[    25.877] 	ABI class: X.Org Server Extension, version 9.0
[    25.877] (==) AIGLX enabled
[    25.877] (==) Matched intel as autoconfigured driver 0
[    25.877] (==) Matched intel as autoconfigured driver 1
[    25.877] (==) Matched modesetting as autoconfigured driver 2
[    25.877] (==) Matched fbdev as autoconfigured driver 3
[    25.877] (==) Matched vesa as autoconfigured driver 4
[    25.877] (==) Assigned the driver to the xf86ConfigLayout
[    25.878] (II) LoadModule: "intel"
[    25.878] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[    25.955] (II) Module intel: vendor="X.Org Foundation"
[    25.955] 	compiled for 1.17.4, module version = 2.99.917
[    25.955] 	Module class: X.Org Video Driver
[    25.955] 	ABI class: X.Org Video Driver, version 19.0
[    25.955] (II) LoadModule: "modesetting"
[    25.955] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[    26.068] (II) Module modesetting: vendor="X.Org Foundation"
[    26.068] 	compiled for 1.17.4, module version = 1.17.4
[    26.068] 	Module class: X.Org Video Driver
[    26.068] 	ABI class: X.Org Video Driver, version 19.0
[    26.068] (II) LoadModule: "fbdev"
[    26.193] (WW) Warning, couldn't open module fbdev
[    26.193] (II) UnloadModule: "fbdev"
[    26.193] (II) Unloading fbdev
[    26.193] (EE) Failed to load module "fbdev" (module does not exist, 0)
[    26.193] (II) LoadModule: "vesa"
[    26.193] (WW) Warning, couldn't open module vesa
[    26.193] (II) UnloadModule: "vesa"
[    26.193] (II) Unloading vesa
[    26.193] (EE) Failed to load module "vesa" (module does not exist, 0)
[    26.193] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
	i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
	915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
	Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
	GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[    26.194] (II) intel: Driver for Intel(R) HD Graphics: 2000-6000
[    26.194] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100, 6100
[    26.194] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200, 6200, P6300
[    26.194] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[    26.194] (++) using VT number 7

[    26.213] (II) intel(0): Using Kernel Mode Setting driver: i915, version 1.6.0 20150327
[    26.213] (II) intel(0): SNA compiled from 2.99.917-556-g0532031
[    26.215] (WW) Falling back to old probe method for modesetting
[    26.223] (--) intel(0): Integrated Graphics Chipset: Intel(R) HD Graphics 4000
[    26.223] (--) intel(0): CPU: x86-64, sse2, sse3, ssse3, sse4.1, sse4.2, avx; using a maximum of 2 threads
[    26.223] (II) intel(0): Creating default Display subsection in Screen section
	"Default Screen Section" for depth/fbbpp 24/32
[    26.223] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    26.223] (==) intel(0): RGB weight 888
[    26.223] (==) intel(0): Default visual is TrueColor
[    26.224] (II) intel(0): Output LVDS1 has no monitor section
[    26.224] (--) intel(0): Found backlight control interface intel_backlight (type 'raw') for output LVDS1
[    26.224] (II) intel(0): Enabled output LVDS1
[    26.224] (II) intel(0): Output VGA1 has no monitor section
[    26.224] (II) intel(0): Enabled output VGA1
[    26.224] (II) intel(0): Output HDMI1 has no monitor section
[    26.224] (II) intel(0): Enabled output HDMI1
[    26.224] (II) intel(0): Output DP1 has no monitor section
[    26.224] (II) intel(0): Enabled output DP1
[    26.224] (--) intel(0): Using a maximum size of 256x256 for hardware cursors
[    26.224] (II) intel(0): Output VIRTUAL1 has no monitor section
[    26.224] (II) intel(0): Enabled output VIRTUAL1
[    26.224] (--) intel(0): Output LVDS1 using initial mode 1920x1080 on pipe 0
[    26.224] (==) intel(0): TearFree disabled
[    26.225] (==) intel(0): DPI set to (96, 96)
[    26.225] (II) Loading sub module "dri2"
[    26.225] (II) LoadModule: "dri2"
[    26.225] (II) Module "dri2" already built-in
[    26.225] (II) Loading sub module "present"
[    26.225] (II) LoadModule: "present"
[    26.225] (II) Module "present" already built-in
[    26.225] (II) UnloadModule: "modesetting"
[    26.225] (II) Unloading modesetting
[    26.225] (==) Depth 24 pixmap format is 32 bpp
[    26.268] (II) intel(0): SNA initialized with Ivybridge (gen7, gt2) backend
[    26.268] (==) intel(0): Backing store enabled
[    26.268] (==) intel(0): Silken mouse enabled
[    26.269] (II) intel(0): HW Cursor enabled
[    26.269] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    26.289] (==) intel(0): DPMS enabled
[    26.289] (==) intel(0): Display hotplug detection enabled
[    26.289] (II) intel(0): [DRI2] Setup complete
[    26.289] (II) intel(0): [DRI2]   DRI driver: i965
[    26.289] (II) intel(0): [DRI2]   VDPAU driver: va_gl
[    26.289] (II) intel(0): direct rendering: DRI2 enabled
[    26.289] (II) intel(0): hardware support for Present enabled
[    26.289] (--) RandR disabled
[    26.875] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    26.875] (II) AIGLX: enabled GLX_ARB_create_context
[    26.875] (II) AIGLX: enabled GLX_ARB_create_context_profile
[    26.875] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[    26.875] (II) AIGLX: enabled GLX_INTEL_swap_event
[    26.875] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[    26.875] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[    26.875] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[    26.875] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    26.875] (II) AIGLX: enabled GLX_ARB_create_context_robustness
[    26.875] (II) AIGLX: Loaded and initialized i965
[    26.875] (II) GLX: Initialized DRI2 GL provider for screen 0
[    26.905] (II) intel(0): switch to mode 1920x1080@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[    26.906] (II) intel(0): Setting screen physical size to 508 x 285
[    27.438] (II) config/udev: Adding input device Power Button (/dev/input/event7)
[    27.438] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.438] (**) Power Button: Applying InputClass "system-keyboard"
[    27.438] (II) LoadModule: "evdev"
[    27.438] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[    27.469] (II) Module evdev: vendor="X.Org Foundation"
[    27.469] 	compiled for 1.17.4, module version = 2.10.1
[    27.469] 	Module class: X.Org XInput Driver
[    27.469] 	ABI class: X.Org XInput driver, version 21.1
[    27.469] (II) Using input driver 'evdev' for 'Power Button'
[    27.469] (**) Power Button: always reports core events
[    27.469] (**) evdev: Power Button: Device: "/dev/input/event7"
[    27.469] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.469] (--) evdev: Power Button: Found keys
[    27.469] (II) evdev: Power Button: Configuring as keyboard
[    27.469] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input9/event7"
[    27.469] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    27.469] (**) Option "xkb_rules" "evdev"
[    27.469] (**) Option "xkb_model" "pc105+inet"
[    27.469] (**) Option "xkb_layout" "us"
[    27.469] (WW) Option "xkb_variant" requires a string value
[    27.469] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.521] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[    27.521] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.521] (**) Video Bus: Applying InputClass "system-keyboard"
[    27.521] (II) Using input driver 'evdev' for 'Video Bus'
[    27.521] (**) Video Bus: always reports core events
[    27.521] (**) evdev: Video Bus: Device: "/dev/input/event11"
[    27.521] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.521] (--) evdev: Video Bus: Found keys
[    27.521] (II) evdev: Video Bus: Configuring as keyboard
[    27.521] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input13/event11"
[    27.521] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[    27.521] (**) Option "xkb_rules" "evdev"
[    27.521] (**) Option "xkb_model" "pc105+inet"
[    27.521] (**) Option "xkb_layout" "us"
[    27.521] (WW) Option "xkb_variant" requires a string value
[    27.521] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.522] (II) config/udev: Adding input device Sony Vaio Keys (/dev/input/event8)
[    27.522] (**) Sony Vaio Keys: Applying InputClass "evdev keyboard catchall"
[    27.522] (**) Sony Vaio Keys: Applying InputClass "system-keyboard"
[    27.522] (II) Using input driver 'evdev' for 'Sony Vaio Keys'
[    27.522] (**) Sony Vaio Keys: always reports core events
[    27.522] (**) evdev: Sony Vaio Keys: Device: "/dev/input/event8"
[    27.522] (--) evdev: Sony Vaio Keys: Vendor 0x104d Product 0
[    27.522] (--) evdev: Sony Vaio Keys: Found keys
[    27.522] (II) evdev: Sony Vaio Keys: Configuring as keyboard
[    27.522] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input10/event8"
[    27.522] (II) XINPUT: Adding extended input device "Sony Vaio Keys" (type: KEYBOARD, id 8)
[    27.522] (**) Option "xkb_rules" "evdev"
[    27.522] (**) Option "xkb_model" "pc105+inet"
[    27.522] (**) Option "xkb_layout" "us"
[    27.522] (WW) Option "xkb_variant" requires a string value
[    27.522] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.523] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/event9)
[    27.523] (**) Sony Vaio Jogdial: Applying InputClass "evdev keyboard catchall"
[    27.523] (**) Sony Vaio Jogdial: Applying InputClass "system-keyboard"
[    27.523] (II) Using input driver 'evdev' for 'Sony Vaio Jogdial'
[    27.523] (**) Sony Vaio Jogdial: always reports core events
[    27.523] (**) evdev: Sony Vaio Jogdial: Device: "/dev/input/event9"
[    27.523] (--) evdev: Sony Vaio Jogdial: Vendor 0x104d Product 0
[    27.523] (--) evdev: Sony Vaio Jogdial: Found 2 mouse buttons
[    27.523] (--) evdev: Sony Vaio Jogdial: Found scroll wheel(s)
[    27.523] (--) evdev: Sony Vaio Jogdial: Found relative axes
[    27.523] (II) evdev: Sony Vaio Jogdial: Forcing relative x/y axes to exist.
[    27.523] (II) evdev: Sony Vaio Jogdial: Configuring as mouse
[    27.523] (II) evdev: Sony Vaio Jogdial: Adding scrollwheel support
[    27.523] (**) evdev: Sony Vaio Jogdial: YAxisMapping: buttons 4 and 5
[    27.523] (**) evdev: Sony Vaio Jogdial: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.523] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/SNY5001:00/input/input11/event9"
[    27.523] (II) XINPUT: Adding extended input device "Sony Vaio Jogdial" (type: MOUSE, id 9)
[    27.523] (II) evdev: Sony Vaio Jogdial: initialized for relative axes.
[    27.524] (**) Sony Vaio Jogdial: (accel) keeping acceleration scheme 1
[    27.524] (**) Sony Vaio Jogdial: (accel) acceleration profile 0
[    27.524] (**) Sony Vaio Jogdial: (accel) acceleration factor: 2.000
[    27.524] (**) Sony Vaio Jogdial: (accel) acceleration threshold: 4
[    27.524] (II) config/udev: Adding input device Sony Vaio Jogdial (/dev/input/mouse3)
[    27.524] (**) Sony Vaio Jogdial: Applying InputClass "system-keyboard"
[    27.524] (II) No input driver specified, ignoring this device.
[    27.524] (II) This device may have been added with another device file.
[    27.525] (II) config/udev: Adding input device Video Bus (/dev/input/event10)
[    27.525] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[    27.525] (**) Video Bus: Applying InputClass "system-keyboard"
[    27.525] (II) Using input driver 'evdev' for 'Video Bus'
[    27.525] (**) Video Bus: always reports core events
[    27.525] (**) evdev: Video Bus: Device: "/dev/input/event10"
[    27.525] (--) evdev: Video Bus: Vendor 0 Product 0x6
[    27.525] (--) evdev: Video Bus: Found keys
[    27.525] (II) evdev: Video Bus: Configuring as keyboard
[    27.525] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input12/event10"
[    27.525] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 10)
[    27.525] (**) Option "xkb_rules" "evdev"
[    27.525] (**) Option "xkb_model" "pc105+inet"
[    27.525] (**) Option "xkb_layout" "us"
[    27.525] (WW) Option "xkb_variant" requires a string value
[    27.525] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.525] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[    27.526] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    27.526] (**) Power Button: Applying InputClass "system-keyboard"
[    27.526] (II) Using input driver 'evdev' for 'Power Button'
[    27.526] (**) Power Button: always reports core events
[    27.526] (**) evdev: Power Button: Device: "/dev/input/event5"
[    27.526] (--) evdev: Power Button: Vendor 0 Product 0x1
[    27.526] (--) evdev: Power Button: Found keys
[    27.526] (II) evdev: Power Button: Configuring as keyboard
[    27.526] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input7/event5"
[    27.526] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 11)
[    27.526] (**) Option "xkb_rules" "evdev"
[    27.526] (**) Option "xkb_model" "pc105+inet"
[    27.526] (**) Option "xkb_layout" "us"
[    27.526] (WW) Option "xkb_variant" requires a string value
[    27.526] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.526] (II) config/udev: Adding input device Lid Switch (/dev/input/event6)
[    27.526] (II) No input driver specified, ignoring this device.
[    27.526] (II) This device may have been added with another device file.
[    27.527] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event1)
[    27.527] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[    27.527] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "system-keyboard"
[    27.527] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[    27.527] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[    27.527] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event1"
[    27.528] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[    27.528] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[    27.528] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[    27.528] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/0003:0518:0001.0001/input/input2/event1"
[    27.528] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 12)
[    27.528] (**) Option "xkb_rules" "evdev"
[    27.528] (**) Option "xkb_model" "pc105+inet"
[    27.528] (**) Option "xkb_layout" "us"
[    27.528] (WW) Option "xkb_variant" requires a string value
[    27.528] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.529] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/event2)
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "evdev keyboard catchall"
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "system-keyboard"
[    27.529] (II) Using input driver 'evdev' for 'Plus More Enterprise LTD. USB-compliant keyboard'
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: always reports core events
[    27.529] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Device: "/dev/input/event2"
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Vendor 0x518 Product 0x1
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found 1 mouse buttons
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found scroll wheel(s)
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found relative axes
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found x and y relative axes
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found absolute axes
[    27.529] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Forcing absolute x/y axes to exist.
[    27.529] (--) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Found keys
[    27.529] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as mouse
[    27.529] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Configuring as keyboard
[    27.529] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: Adding scrollwheel support
[    27.529] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: YAxisMapping: buttons 4 and 5
[    27.529] (**) evdev: Plus More Enterprise LTD. USB-compliant keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.529] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.1/0003:0518:0001.0002/input/input3/event2"
[    27.529] (II) XINPUT: Adding extended input device "Plus More Enterprise LTD. USB-compliant keyboard" (type: KEYBOARD, id 13)
[    27.529] (**) Option "xkb_rules" "evdev"
[    27.529] (**) Option "xkb_model" "pc105+inet"
[    27.529] (**) Option "xkb_layout" "us"
[    27.529] (WW) Option "xkb_variant" requires a string value
[    27.529] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.529] (II) evdev: Plus More Enterprise LTD. USB-compliant keyboard: initialized for relative axes.
[    27.529] (WW) evdev: Plus More Enterprise LTD. USB-compliant keyboard: ignoring absolute axes.
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) keeping acceleration scheme 1
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration profile 0
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration factor: 2.000
[    27.529] (**) Plus More Enterprise LTD. USB-compliant keyboard: (accel) acceleration threshold: 4
[    27.530] (II) config/udev: Adding input device Plus More Enterprise LTD. USB-compliant keyboard (/dev/input/mouse0)
[    27.530] (**) Plus More Enterprise LTD. USB-compliant keyboard: Applying InputClass "system-keyboard"
[    27.530] (II) No input driver specified, ignoring this device.
[    27.530] (II) This device may have been added with another device file.
[    27.531] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event4)
[    27.531] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[    27.531] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[    27.531] (**) Logitech USB Optical Mouse: always reports core events
[    27.531] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event4"
[    27.583] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc077
[    27.583] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[    27.583] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[    27.583] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[    27.583] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[    27.583] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[    27.583] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[    27.583] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[    27.583] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.584] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/0003:046D:C077.0005/input/input6/event4"
[    27.584] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 14)
[    27.584] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[    27.584] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[    27.584] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[    27.584] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[    27.584] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[    27.586] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse2)
[    27.586] (II) No input driver specified, ignoring this device.
[    27.586] (II) This device may have been added with another device file.
[    27.588] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/event3)
[    27.588] (**) Atmel Atmel maXTouch Digitizer: Applying InputClass "evdev touchscreen catchall"
[    27.588] (II) Using input driver 'evdev' for 'Atmel Atmel maXTouch Digitizer'
[    27.588] (**) Atmel Atmel maXTouch Digitizer: always reports core events
[    27.588] (**) evdev: Atmel Atmel maXTouch Digitizer: Device: "/dev/input/event3"
[    27.640] (--) evdev: Atmel Atmel maXTouch Digitizer: Vendor 0x3eb Product 0x880f
[    27.640] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute axes
[    27.640] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute multitouch axes
[    27.640] (II) evdev: Atmel Atmel maXTouch Digitizer: No buttons found, faking one.
[    27.640] (--) evdev: Atmel Atmel maXTouch Digitizer: Found x and y absolute axes
[    27.640] (--) evdev: Atmel Atmel maXTouch Digitizer: Found absolute touchscreen
[    27.640] (II) evdev: Atmel Atmel maXTouch Digitizer: Configuring as touchscreen
[    27.640] (**) evdev: Atmel Atmel maXTouch Digitizer: YAxisMapping: buttons 4 and 5
[    27.640] (**) evdev: Atmel Atmel maXTouch Digitizer: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    27.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:03EB:880F.0003/input/input4/event3"
[    27.640] (II) XINPUT: Adding extended input device "Atmel Atmel maXTouch Digitizer" (type: TOUCHSCREEN, id 15)
[    27.640] (II) evdev: Atmel Atmel maXTouch Digitizer: initialized for absolute axes.
[    27.641] (**) Atmel Atmel maXTouch Digitizer: (accel) keeping acceleration scheme 1
[    27.641] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration profile 0
[    27.641] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration factor: 2.000
[    27.641] (**) Atmel Atmel maXTouch Digitizer: (accel) acceleration threshold: 4
[    27.642] (II) config/udev: Adding input device Atmel Atmel maXTouch Digitizer (/dev/input/mouse1)
[    27.642] (II) No input driver specified, ignoring this device.
[    27.642] (II) This device may have been added with another device file.
[    27.643] (II) config/udev: Adding input device Front Camera (/dev/input/event16)
[    27.643] (**) Front Camera: Applying InputClass "evdev keyboard catchall"
[    27.643] (**) Front Camera: Applying InputClass "system-keyboard"
[    27.643] (II) Using input driver 'evdev' for 'Front Camera'
[    27.643] (**) Front Camera: always reports core events
[    27.643] (**) evdev: Front Camera: Device: "/dev/input/event16"
[    27.643] (--) evdev: Front Camera: Vendor 0xbda Product 0x5729
[    27.643] (--) evdev: Front Camera: Found keys
[    27.643] (II) evdev: Front Camera: Configuring as keyboard
[    27.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.3/1-1.3:1.0/input/input18/event16"
[    27.643] (II) XINPUT: Adding extended input device "Front Camera" (type: KEYBOARD, id 16)
[    27.643] (**) Option "xkb_rules" "evdev"
[    27.643] (**) Option "xkb_model" "pc105+inet"
[    27.643] (**) Option "xkb_layout" "us"
[    27.643] (WW) Option "xkb_variant" requires a string value
[    27.643] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.644] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event12)
[    27.644] (II) No input driver specified, ignoring this device.
[    27.644] (II) This device may have been added with another device file.
[    27.645] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event13)
[    27.645] (II) No input driver specified, ignoring this device.
[    27.645] (II) This device may have been added with another device file.
[    27.645] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[    27.645] (II) No input driver specified, ignoring this device.
[    27.645] (II) This device may have been added with another device file.
[    27.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[    27.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[    27.646] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[    27.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[    27.646] (**) AT Translated Set 2 keyboard: always reports core events
[    27.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[    27.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[    27.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[    27.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[    27.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[    27.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 17)
[    27.646] (**) Option "xkb_rules" "evdev"
[    27.646] (**) Option "xkb_model" "pc105+inet"
[    27.646] (**) Option "xkb_layout" "us"
[    27.646] (WW) Option "xkb_variant" requires a string value
[    27.646] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[    27.647] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event15)
[    27.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[    27.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchscreen catchall"
[    27.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[    27.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[    27.647] (II) LoadModule: "synaptics"
[    27.648] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[    27.668] (II) Module synaptics: vendor="X.Org Foundation"
[    27.668] 	compiled for 1.17.4, module version = 1.8.3
[    27.668] 	Module class: X.Org XInput Driver
[    27.668] 	ABI class: X.Org XInput driver, version 21.1
[    27.668] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[    27.668] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.668] (**) Option "Device" "/dev/input/event15"
[    27.783] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[    27.783] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1276 - 5666 (res 43)
[    27.783] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1144 - 4710 (res 58)
[    27.783] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[    27.783] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[    27.783] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[    27.784] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[    27.784] (**) Option "TapButton1" "1"
[    27.784] (**) Option "TapButton2" "2"
[    27.784] (**) Option "TapButton3" "3"
[    27.784] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[    27.784] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.784] (**) SynPS/2 Synaptics TouchPad: always reports core events
[    27.863] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input16/event15"
[    27.863] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 18)
[    27.863] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[    27.863] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[    27.863] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.035
[    27.864] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[    27.864] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[    27.864] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[    27.864] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[    27.864] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[    27.865] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse4)
[    27.865] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[    28.224] (II) intel(0): EDID vendor "CMN", prod id 5563
[    28.224] (II) intel(0): Printing DDC gathered Modelines:
[    28.224] (II) intel(0): Modeline "1920x1080"x0.0  152.54  1920 2010 2070 2226  1080 1086 1095 1142 -hsync -vsync (68.5 kHz eP)
[  1328.496] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1334.163] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1334.163] (II) intel(0): switch to mode 1920x1080@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1334.307] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1370.450] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1377.909] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1377.909] (II) intel(0): switch to mode 1920x1080@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1378.060] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[  1412.466] (II) AIGLX: Suspending AIGLX clients for VT switch
[  1421.634] (II) AIGLX: Resuming AIGLX clients after VT switch
[  1421.634] (II) intel(0): switch to mode 1920x1080@60.0 on LVDS1 using pipe 0, position (0, 0), rotation normal, reflection none
[  1421.770] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found

اگه میتونه مرتبط باشه باید بگم که من همیشه یه کیبورد اضافی و یک ماوس به لپتابم وصل میکنم.

با تشکر


Mahatma Gandhi - The weak can never forgive. Forgiveness is the attribute of the strong

آفلاین

#2 2016-02-28 17:02:14

Риал Краесис
عضو
از : تهران
ثبت شده: 2015-09-16
ارسال ها: 303

پاسخ: اشتهای بالای Xorg در مصرف CPU

خود آرچ؟ یا آرچ بیس؟
X.org رو اپدیت کن!۱٫۱۸ اخرینشه!
نوع میز کار هم بگی کمک میکنه!


*** I FIGHT FOR USERS ***

آفلاین

#3 2016-02-28 17:09:26

LinArcX
عضو
ثبت شده: 2015-09-18
ارسال ها: 725
وب سایت

پاسخ: اشتهای بالای Xorg در مصرف CPU

درایور گرافیکی که استفاده میکنی چیه؟
اگه یه ویندوز منیجر داری مث اپن باکس یه تست هم رو اون بگیر ببین شرایط همینطوریه یا نه.


"Enough!!!Don't Use "DEFAULTS" Any More..."make it simple stupid

آفلاین

#4 2016-02-28 17:38:11

ehsan_faal
عضو
از : تهران
ثبت شده: 2015-10-02
ارسال ها: 270

پاسخ: اشتهای بالای Xorg در مصرف CPU

سلام.
مانجارو xfce دارم.
این نسخه از Xorg توی مانجارو آخرین نسخه است.
کارت گرافیکم nvidia ست و موقع نصب مانجارو ، گزینه نصب براساس درایورهای غیر مجانی رو انتخاب کرده بودم، پس باید از درایور خود nvidia استفاده کنم.(راستش توی این مورد شک دارم، اگه بگید خروجی چیا رو بذارم، ممنون میشم)


Mahatma Gandhi - The weak can never forgive. Forgiveness is the attribute of the strong

آفلاین

#5 2016-02-29 00:30:47

Arcush
Moderator
ثبت شده: 2015-09-15
ارسال ها: 1,281

پاسخ: اشتهای بالای Xorg در مصرف CPU

با توجه به اخطاری که راجع به لود نکردن چند تا ماژول درایور داده و همچنین نوع درایورهائی که نصب کردید، به نظرم باید حل مساله رو از طریق نصب درایورهای آزاد شروع کنید.

آفلاین

پانوشت انجمن

پشتیبانی توسط تیم آرچ لینوکس ایران و نیرو گرفته با FluxBB