شما هنوز به سیستم وارد نشده اید.

#1 2019-07-05 19:45:06

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

کمک برای گذارش مشکل گرافیک amd

به نام خدا.
سلام دوستان ،  امیدوارم خوب باشید.
دوستان عزیز من چند وقتی بود که با گرافیک سیستم مشکل داشتم.( مشکل رو اینجا می تونید ببینید: https://forum.ubuntu.ir/index.php/topic,149475.0.html ).
بعد از کمی برسی رسیدم به حذف تمام پکیج های mesa و  amdgpu  و نصب دوباره به همراه amdgpu pro ، اما مشکلی وجود داره برای پاک کردن mesa که امید دارم کمک کنید ( البته اگه راهکاری برای حل مشکل گرافیکم هم دارید یا راه کاری برای کمک به  گزارش مشکلش ممنون میشم اعلام کنید)
خروجی ترمینال برای حذف mesa :

checking dependencies...
error: failed to prepare transaction (could not satisfy dependencies)
:: gst-plugins-base-libs: removing mesa breaks dependency 'mesa'
:: gtk3: removing mesa breaks dependency 'mesa'
:: lib32-mesa: removing mesa breaks dependency 'mesa'
:: libglvnd: removing mesa breaks dependency 'mesa'
:: libglvnd: removing mesa breaks dependency 'opengl-driver'
:: qt5-base: removing mesa breaks dependency 'mesa'
 

20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

#2 2019-07-06 09:08:04

Arcush
Moderator
ثبت شده: 2015-09-15
ارسال ها: 1,496

پاسخ: کمک برای گذارش مشکل گرافیک amd

درود. خروجیِ pacman -Suuyy چیست؟

آفلاین

#3 2019-07-06 10:17:22

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

پاسخ: کمک برای گذارش مشکل گرافیک amd

Arcush نوشته است که:

درود. خروجیِ pacman -Suuyy چیست؟

خروجی دستور به شکل زیر هستش

 
:: Synchronizing package databases...
 core                            133.6 KiB   393K/s 00:00 [###############################] 100%
 extra                          1636.4 KiB   157K/s 00:10 [###############################] 100%
 community                         4.8 MiB   530K/s 00:09 [###############################] 100%
 multilib                        170.8 KiB   427K/s 00:00 [###############################] 100%
 archlinuxfr                      11.3 KiB   283K/s 00:00 [###############################] 100%
 archlinuxcn                    1076.7 KiB   637K/s 00:02 [###############################] 100%
:: Starting full system upgrade...
 there is nothing to do

20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

#4 2019-07-06 14:07:32

Arcush
Moderator
ثبت شده: 2015-09-15
ارسال ها: 1,496

پاسخ: کمک برای گذارش مشکل گرافیک amd

معمولن فورس کردن پکمن توضیه نمی شه. گرچه، واقعن با این کار تغییر خاصی توی کهکشان راه شیری اتفاق نمی افته (و بنابراین نباید زیاد نگرانش بود). به هر روی، بی پروا پکمن را فورس کنید و بدترین حالت اینه که مدیریت پکمن روی چندتا بسته دچار تزلزل بشه. همچنین به عنوان کاربر آرچ، نمی تونیم نگران باشیم که نتونید سیستم عامل را (که ممکنه بالا نیاد) بازیابی کنید.

آفلاین

#5 2019-07-06 14:38:04

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

پاسخ: کمک برای گذارش مشکل گرافیک amd

Arcush نوشته است که:

معمولن فورس کردن پکمن توضیه نمی شه. گرچه، واقعن با این کار تغییر خاصی توی کهکشان راه شیری اتفاق نمی افته (و بنابراین نباید زیاد نگرانش بود). به هر روی، بی پروا پکمن را فورس کنید و بدترین حالت اینه که مدیریت پکمن روی چندتا بسته دچار تزلزل بشه. همچنین به عنوان کاربر آرچ، نمی تونیم نگران باشیم که نتونید سیستم عامل را (که ممکنه بالا نیاد) بازیابی کنید.

اصلا نگران بالا نیومدن نیستم ، چون چندر روز گذشته چندین بار سیستم رو ترکوندم باز بالاش اوردم ( قشنگ آب بندی شدم ) ، ولی منظور شما رو از فورس کردن نمی دونم ( معنای لغتی شاید برای من تکرار نشده ) لطفا در موردش کمی توضیح بدین یا لینکی که این کار رو انجام بده.


20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

#6 2019-07-07 09:02:00

morealaz
Moderator
از : کرمان
ثبت شده: 2016-03-19
ارسال ها: 346

پاسخ: کمک برای گذارش مشکل گرافیک amd

نیازی به حذف mesa ندارید. چون یک بسته جنرال هست که برای تمام کارهای گرافیک لازم هست و باید نصب بشه. فقط باید بسته مربوط به درایور کارت گرافیک قبلی رو پاک کنید و درایور جدید رو نصب کنید.
در مورد error ای که در هنگام حذف mesa  با اون مواجه شدید، چون بسته های دیگه مثل gtk3 که در اون خطا نمایش داده شده وابسته به بسته mesa هستند نمیشه بدون حذف اونها بسته mesa رو حذف کنید. برای حذف یک بسته به همراه تمام بسته هایی که وابسته به اون بسته هستند باید از فلگ c- یا cascade-- در هنگام حذف بسته استفاده کرد. به عنوان نمونه:

$ sudo pacman -Rc mesa

ولی باید حواستون باشه که این فرآیند به صورت recursive انجام میشه و ممکن هست بسته های زیادی به دلیل وابسته بودن به بسته مورد نظر یا وابستگی های اون حذف بشوند. به خصوص در مورد بسته mesa چون بسته gtk3 به این بسته وابسته هست و بسته های زیادی به بسته gtk3 وابسته هستند از جمله کلیه دسکتاپهای مبتنی بر gtk مثل GNOME، حذف mesa و وابستگیهای اون منجر به حذف محیط دسکتاپ شما میشه که در مورد مشکل شما گفتم که نیازی به این کار ندارید.
این صفحه روش نصب درایور AMDGPU PRO رو توضیح داده
https://wiki.archlinux.org/index.php/AMDGPU#AMDGPU_PRO

آفلاین

#7 2019-07-08 09:15:34

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

پاسخ: کمک برای گذارش مشکل گرافیک amd

morealaz نوشته است که:

نیازی به حذف mesa ندارید. چون یک بسته جنرال هست که برای تمام کارهای گرافیک لازم هست و باید نصب بشه. فقط باید بسته مربوط به درایور کارت گرافیک قبلی رو پاک کنید و درایور جدید رو نصب کنید.
در مورد error ای که در هنگام حذف mesa  با اون مواجه شدید، چون بسته های دیگه مثل gtk3 که در اون خطا نمایش داده شده وابسته به بسته mesa هستند نمیشه بدون حذف اونها بسته mesa رو حذف کنید. برای حذف یک بسته به همراه تمام بسته هایی که وابسته به اون بسته هستند باید از فلگ c- یا cascade-- در هنگام حذف بسته استفاده کرد. به عنوان نمونه:

$ sudo pacman -Rc mesa

ولی باید حواستون باشه که این فرآیند به صورت recursive انجام میشه و ممکن هست بسته های زیادی به دلیل وابسته بودن به بسته مورد نظر یا وابستگی های اون حذف بشوند. به خصوص در مورد بسته mesa چون بسته gtk3 به این بسته وابسته هست و بسته های زیادی به بسته gtk3 وابسته هستند از جمله کلیه دسکتاپهای مبتنی بر gtk مثل GNOME، حذف mesa و وابستگیهای اون منجر به حذف محیط دسکتاپ شما میشه که در مورد مشکل شما گفتم که نیازی به این کار ندارید.
این صفحه روش نصب درایور AMDGPU PRO رو توضیح داده
https://wiki.archlinux.org/index.php/AMDGPU#AMDGPU_PRO

ممنون از کمک شما من قبلا این صفحه از ویکی رو دیده بودم ، همون طور که توی انجمن اوبونتو هم گفتم بعد از نصب amdgpu-pro سیستم نمی تونه به گرافیک قوی تر سویچ کنه( هنگ می کنه و بعد به صفحه SDDM میره ) ، برای اون راهکاری دارید.( اگه ممکنه کمک کنید)


20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

#8 2019-07-08 16:29:08

morealaz
Moderator
از : کرمان
ثبت شده: 2016-03-19
ارسال ها: 346

پاسخ: کمک برای گذارش مشکل گرافیک amd

لازم هست برای حل مشکل کمی اطلاعات در مورد سیستم و تنظیمات اون به ما بدید تا بتونیم کمکتون کنیم. من این اطلاعات رو از شما می خواهم:
1- خروجی دستور lspci
2- آخرین لاگ xorg که در مسیر زیر قرار داره:

$HOME/.local/share/xorg/

توی این پوشه نگاه کنید و هر کدوم که جدید تر بود رو نشون بدید
3- محیط دسکتاپی که از اون استفاده می کنید که با توضیحاتی که دادید فکر میکنم KDE باشه.
4- خروجی دستور زیر:

pacman -Qs xf86-video

5- احیانا اگر تنظیمات خاصی برای X انجام دادید اون تنظیمات رو هم نشون بدید. در مسیر های زیر:

/etc/X11/xorg.conf.d/
یا 
/etc/X11/xorg.conf

ویرایش : ببخشید اصل کاری رو یادم رفت:
6- خروجی دستور dmesg

7- تنظیمات بوت لودر سیستم (میخواهم بدونم چه پارامترهایی موقع بوت برای kernel ارسال میشه)
به عنوان نمونه اگر از گراب استفاده میکنید محتوای فایل etc/default/grub/

آخرین ویرایش توسط morealaz (2019-07-08 16:41:59)

آفلاین

#9 2019-07-08 17:01:22

morealaz
Moderator
از : کرمان
ثبت شده: 2016-03-19
ارسال ها: 346

پاسخ: کمک برای گذارش مشکل گرافیک amd

مدل کارت گرافیک شما R9 M280X و طبق چیزی که در AMD_Radeon_Rx_200_series#Mobile_models دیدم این کارت از نسل GCN 2 هست. طبق گفته ویکی در صفحه Xorg#AMD برای این نسل کارت گرافیک یا میتونید از درایورهای آزاد AMDGPU و یا ATI استفاده کنید و یا از درایور بسته Catalyst ولی از AMDGPU PRO نمیشه استفاده کرد. درایور Catalyst توصیه نمیشه و طبق ویکی آرچ ارجحیت خاصی هم نداره. در مورد درایور AMDGPU هم عبارت experimental یا آزمایشی بیان شده. آیا شما درایور ATI رو هم امتحان کردید؟

آفلاین

#10 2019-07-15 12:15:36

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

پاسخ: کمک برای گذارش مشکل گرافیک amd

morealaz نوشته است که:

لازم هست برای حل مشکل کمی اطلاعات در مورد سیستم و تنظیمات اون به ما بدید تا بتونیم کمکتون کنیم. من این اطلاعات رو از شما می خواهم:
1- خروجی دستور lspci
2- آخرین لاگ xorg که در مسیر زیر قرار داره:

$HOME/.local/share/xorg/

توی این پوشه نگاه کنید و هر کدوم که جدید تر بود رو نشون بدید
3- محیط دسکتاپی که از اون استفاده می کنید که با توضیحاتی که دادید فکر میکنم KDE باشه.
4- خروجی دستور زیر:

pacman -Qs xf86-video

5- احیانا اگر تنظیمات خاصی برای X انجام دادید اون تنظیمات رو هم نشون بدید. در مسیر های زیر:

/etc/X11/xorg.conf.d/
یا 
/etc/X11/xorg.conf

ویرایش : ببخشید اصل کاری رو یادم رفت:
6- خروجی دستور dmesg

7- تنظیمات بوت لودر سیستم (میخواهم بدونم چه پارامترهایی موقع بوت برای kernel ارسال میشه)
به عنوان نمونه اگر از گراب استفاده میکنید محتوای فایل etc/default/grub/

خروجی دستور lspci

00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Complex
00:00.2 IOMMU: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) I/O Memory Management Unit
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri [Radeon R7 Graphics]
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kaveri HDMI/DP Audio Controller
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Port
00:02.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Kaveri P2P Bridge for GFX PCIe Port [1:0]
00:03.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Port
00:03.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Port
00:03.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Port
00:04.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Root Port
00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
00:10.1 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 09)
00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40)
00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11)
00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11)
00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 16)
00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01)
00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11)
00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40)
00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 30h-3fh) Processor Function 5
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Saturn PRO/XT [Radeon R9 M270X/M280X]
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev bb)
03:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTL8411B PCI Express Card Reader (rev 01)
03:00.1 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 12)

فایل xorg برای من خروجی توی مسیر HOME/.local/share/xorg/ نداره.
بله از kde استفاده می کنم.
خروجی دستور sudo pacman -Qs xf86-video

local/xf86-video-amdgpu 19.0.1-1 (xorg-drivers)
    X.org amdgpu video driver

مسیر etc/X11/xorg.conf.d/20-amdgpu.conf/

Section "Device"
     Identifier "AMD"
     Driver "amdgpu"
 EndSection

خروجی دستور dmesg

[    0.000000] Linux version 5.2.0-zen1-1-zen (builduser@heftig-100980) (gcc version 9.1.0 (GCC)) #1 ZEN SMP PREEMPT Mon Jul 8 18:19:02 UTC 2019
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-zen root=/dev/mapper/ALi-lv_root rw cryptdevice=UUID=cdad3f38-55f8-4052-b33b-14353bb7576b:ALi root=/dev/mapper/ALi-lv_root rw radeon.cik_support=0 amdgpu.cik_support=1
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Hygon HygonGenuine
[    0.000000]   Centaur CentaurHauls
[    0.000000] [Firmware Info]: CPU: Re-enabling disabled Topology Extensions Support.
[    0.000000] random: get_random_u32 called from bsp_init_amd+0x278/0x330 with crng_init=0
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000006c9c7fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006c9c8000-0x000000006c9f7fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006c9f8000-0x000000006ce17fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ce18000-0x000000006df25fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006df26000-0x000000006e2ccfff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006e2cd000-0x000000006e32dfff] type 20
[    0.000000] BIOS-e820: [mem 0x000000006e32e000-0x000000006e32efff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e32f000-0x000000006e534fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x000000006e535000-0x000000006e687fff] usable
[    0.000000] BIOS-e820: [mem 0x000000006e688000-0x000000006ec5afff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006ec5b000-0x000000006ec8ffff] usable
[    0.000000] BIOS-e820: [mem 0x000000006ec90000-0x000000006f3f0fff] reserved
[    0.000000] BIOS-e820: [mem 0x000000006f3f1000-0x000000006f3fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec01fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000044effffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] efi: EFI v2.31 by American Megatrends
[    0.000000] efi:  ACPI=0x6ce9c000  ACPI 2.0=0x6ce9c000  SMBIOS=0x6e2cb998 
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: ASUSTeK COMPUTER INC. N551ZU/N551ZU, BIOS N551ZU.307 01/28/2015
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2695.193 MHz processor
[    0.000163] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000164] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000171] last_pfn = 0x44f000 max_arch_pfn = 0x400000000
[    0.000176] MTRR default type: uncachable
[    0.000176] MTRR fixed ranges enabled:
[    0.000178]   00000-9FFFF write-back
[    0.000179]   A0000-BFFFF write-through
[    0.000180]   C0000-DFFFF uncachable
[    0.000180]   E0000-FFFFF write-protect
[    0.000181] MTRR variable ranges enabled:
[    0.000182]   0 base 000000000000 mask FFFF80000000 write-back
[    0.000184]   1 base 000070000000 mask FFFFF0000000 uncachable
[    0.000184]   2 disabled
[    0.000185]   3 disabled
[    0.000185]   4 disabled
[    0.000186]   5 disabled
[    0.000186]   6 disabled
[    0.000187]   7 disabled
[    0.000188] TOM2: 000000044f000000 aka 17648M
[    0.000598] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
[    0.000735] total RAM covered: 1792M
[    0.001274] Found optimal setting for mtrr clean up
[    0.001276]  gran_size: 64K  chunk_size: 512M        num_reg: 2      lose cover RAM: 0G
[    0.001401] e820: update [mem 0x70000000-0xffffffff] usable ==> reserved
[    0.001407] last_pfn = 0x6f400 max_arch_pfn = 0x400000000
[    0.005904] check: Scanning 1 areas for low memory corruption
[    0.005909] Using GB pages for direct mapping
[    0.005912] BRK [0x3c0201000, 0x3c0201fff] PGTABLE
[    0.005914] BRK [0x3c0202000, 0x3c0202fff] PGTABLE
[    0.005916] BRK [0x3c0203000, 0x3c0203fff] PGTABLE
[    0.005931] BRK [0x3c0204000, 0x3c0204fff] PGTABLE
[    0.005932] BRK [0x3c0205000, 0x3c0205fff] PGTABLE
[    0.006030] BRK [0x3c0206000, 0x3c0206fff] PGTABLE
[    0.006056] BRK [0x3c0207000, 0x3c0207fff] PGTABLE
[    0.006108] BRK [0x3c0208000, 0x3c0208fff] PGTABLE
[    0.006162] BRK [0x3c0209000, 0x3c0209fff] PGTABLE
[    0.006193] BRK [0x3c020a000, 0x3c020afff] PGTABLE
[    0.006195] BRK [0x3c020b000, 0x3c020bfff] PGTABLE
[    0.006242] BRK [0x3c020c000, 0x3c020cfff] PGTABLE
[    0.006311] Secure boot could not be determined
[    0.006312] RAMDISK: [mem 0x33a2b000-0x35d0cfff]
[    0.006350] ACPI: Early table checksum verification disabled
[    0.006355] ACPI: RSDP 0x000000006CE9C000 000024 (v02 _ASUS_)
[    0.006359] ACPI: XSDT 0x000000006CE9C098 0000B4 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.006365] ACPI: FACP 0x000000006CEA9E98 00010C (v05 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.006370] ACPI BIOS Warning (bug): Optional FADT field Pm2ControlBlock has valid Length but zero Address: 0x0000000000000000/0x1 (20190509/tbfadt-615)
[    0.006374] ACPI: DSDT 0x000000006CE9C1E8 00DCAD (v02 _ASUS_ Notebook 00000000 INTL 20091112)
[    0.006378] ACPI: FACS 0x000000006DF1AE80 000040
[    0.006380] ACPI: APIC 0x000000006CEA9FA8 00007E (v03 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.006383] ACPI: FPDT 0x000000006CEAA028 000044 (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.006386] ACPI: FIDT 0x000000006CEAA070 00009C (v01 _ASUS_ Notebook 01072009 AMI  00010013)
[    0.006388] ACPI: ECDT 0x000000006CEAA110 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[    0.006391] ACPI: MCFG 0x000000006CEAA1D8 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00010013)
[    0.006393] ACPI: HPET 0x000000006CEAA218 000038 (v01 _ASUS_ Notebook 01072009 AMI  00000005)
[    0.006395] ACPI: UEFI 0x000000006CEAA250 000042 (v01 _ASUS_ Notebook 01072009      00000000)
[    0.006398] ACPI: IVRS 0x000000006CEAA298 000078 (v02 AMD    BALLINA  00000001 AMD  00000000)
[    0.006401] ACPI: VFCT 0x000000006CEAA310 00F684 (v01 _ASUS_ Notebook 00000001 AMD  31504F47)
[    0.006403] ACPI: BGRT 0x000000006CEB9998 000038 (v01 _ASUS_ Notebook 01072009 ASUS 00010013)
[    0.006406] ACPI: SSDT 0x000000006CEB99D0 000B9C (v01 AMD    BALLINA  00000001 AMD  00000001)
[    0.006408] ACPI: SSDT 0x000000006CEBA570 009AC7 (v02 AMD    BALLINA  00000002 MSFT 04000000)
[    0.006411] ACPI: CRAT 0x000000006CEC4038 0005A0 (v01 AMD    BALLINA  00000001 AMD  00000001)
[    0.006414] ACPI: SSDT 0x000000006CEC45D8 00122C (v01 AMD    CPMCMN   00000001 INTL 20051117)
[    0.006416] ACPI: SSDT 0x000000006CEC5808 000FD6 (v01 AMD    CPMZPODD 00000001 INTL 20051117)
[    0.006418] ACPI: SSDT 0x000000006CEC67E0 00146D (v01 AMD    CPMDFIGP 00000001 INTL 20051117)
[    0.006421] ACPI: SSDT 0x000000006CEC7C50 000852 (v01 AMD    CPMDFDGP 00000001 INTL 20051117)
[    0.006430] ACPI: Local APIC address 0xfee00000
[    0.006552] No NUMA configuration found
[    0.006553] Faking a node at [mem 0x0000000000000000-0x000000044effffff]
[    0.006557] NODE_DATA(0) allocated [mem 0x44effb000-0x44effefff]
[    0.006590] Zone ranges:
[    0.006590]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.006592]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.006593]   Normal   [mem 0x0000000100000000-0x000000044effffff]
[    0.006594]   Device   empty
[    0.006595] Movable zone start for each node
[    0.006595] Early memory node ranges
[    0.006596]   node   0: [mem 0x0000000000001000-0x000000000009ffff]
[    0.006597]   node   0: [mem 0x0000000000100000-0x000000006c9c7fff]
[    0.006597]   node   0: [mem 0x000000006c9f8000-0x000000006ce17fff]
[    0.006598]   node   0: [mem 0x000000006e32e000-0x000000006e32efff]
[    0.006599]   node   0: [mem 0x000000006e535000-0x000000006e687fff]
[    0.006599]   node   0: [mem 0x000000006ec5b000-0x000000006ec8ffff]
[    0.006600]   node   0: [mem 0x000000006f3f1000-0x000000006f3fffff]
[    0.006601]   node   0: [mem 0x0000000100000000-0x000000044effffff]
[    0.006746] Zeroed struct page in unavailable ranges: 12513 pages
[    0.006748] Initmem setup node 0 [mem 0x0000000000001000-0x000000044effffff]
[    0.006749] On node 0 totalpages: 3915551
[    0.006750]   DMA zone: 64 pages used for memmap
[    0.006751]   DMA zone: 23 pages reserved
[    0.006752]   DMA zone: 3999 pages, LIFO batch:0
[    0.006815]   DMA32 zone: 6910 pages used for memmap
[    0.006815]   DMA32 zone: 442240 pages, LIFO batch:63
[    0.016031]   Normal zone: 54208 pages used for memmap
[    0.016032]   Normal zone: 3469312 pages, LIFO batch:63
[    0.072796] ACPI: PM-Timer IO Port: 0x808
[    0.072799] ACPI: Local APIC address 0xfee00000
[    0.072806] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.072815] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
[    0.072819] IOAPIC[1]: apic_id 1, version 33, address 0xfec01000, GSI 24-55
[    0.072821] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.072823] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.072824] ACPI: IRQ0 used by override.
[    0.072825] ACPI: IRQ9 used by override.
[    0.072827] Using ACPI (MADT) for SMP configuration information
[    0.072828] ACPI: HPET id: 0x10228210 base: 0xfed00000
[    0.072840] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.072865] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.072866] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[    0.072868] PM: Registered nosave memory: [mem 0x6c9c8000-0x6c9f7fff]
[    0.072870] PM: Registered nosave memory: [mem 0x6ce18000-0x6df25fff]
[    0.072870] PM: Registered nosave memory: [mem 0x6df26000-0x6e2ccfff]
[    0.072871] PM: Registered nosave memory: [mem 0x6e2cd000-0x6e32dfff]
[    0.072872] PM: Registered nosave memory: [mem 0x6e32f000-0x6e534fff]
[    0.072874] PM: Registered nosave memory: [mem 0x6e688000-0x6ec5afff]
[    0.072876] PM: Registered nosave memory: [mem 0x6ec90000-0x6f3f0fff]
[    0.072877] PM: Registered nosave memory: [mem 0x6f400000-0xfebfffff]
[    0.072878] PM: Registered nosave memory: [mem 0xfec00000-0xfec01fff]
[    0.072878] PM: Registered nosave memory: [mem 0xfec02000-0xfec0ffff]
[    0.072879] PM: Registered nosave memory: [mem 0xfec10000-0xfec10fff]
[    0.072880] PM: Registered nosave memory: [mem 0xfec11000-0xfecfffff]
[    0.072880] PM: Registered nosave memory: [mem 0xfed00000-0xfed00fff]
[    0.072881] PM: Registered nosave memory: [mem 0xfed01000-0xfed7ffff]
[    0.072881] PM: Registered nosave memory: [mem 0xfed80000-0xfed8ffff]
[    0.072882] PM: Registered nosave memory: [mem 0xfed90000-0xfeffffff]
[    0.072882] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.072885] [mem 0x6f400000-0xfebfffff] available for PCI devices
[    0.072886] Booting paravirtualized kernel on bare hardware
[    0.072889] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.186850] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:4 nr_node_ids:1
[    0.187366] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[    0.187373] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[    0.187374] pcpu-alloc: [0] 0 1 2 3 
[    0.187395] Built 1 zonelists, mobility grouping on.  Total pages: 3854346
[    0.187396] Policy zone: Normal
[    0.187398] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-zen root=/dev/mapper/ALi-lv_root rw cryptdevice=UUID=cdad3f38-55f8-4052-b33b-14353bb7576b:ALi root=/dev/mapper/ALi-lv_root rw radeon.cik_support=0 amdgpu.cik_support=1
[    0.200800] Calgary: detecting Calgary via BIOS EBDA area
[    0.200802] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.264330] Memory: 15250836K/15662204K available (14339K kernel code, 1321K rwdata, 3852K rodata, 1600K init, 3508K bss, 411368K reserved, 0K cma-reserved)
[    0.264470] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.264485] ftrace: allocating 34705 entries in 136 pages
[    0.279564] rcu: Preemptible hierarchical RCU implementation.
[    0.279566] rcu:     CONFIG_RCU_FANOUT set to non-default value of 32.
[    0.279566] rcu:     RCU dyntick-idle grace-period acceleration is enabled.
[    0.279567] rcu:     RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=4.
[    0.279568] rcu:     RCU priority boosting: priority 1 delay 500 ms.
[    0.279568]  Tasks RCU enabled.
[    0.279569] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[    0.279570] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[    0.281459] NR_IRQS: 20736, nr_irqs: 1000, preallocated irqs: 16
[    0.281611] rcu:     Offload RCU callbacks from CPUs: (none).
[    0.281689] Console: colour dummy device 80x25
[    0.281695] printk: console [tty0] enabled
[    0.281715] ACPI: Core revision 20190509
[    0.282062] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
[    0.282073] hpet clockevent registered
[    0.282078] APIC: Switch to symmetric I/O mode setup
[    0.335827] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.352092] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x26d9817b4d0, max_idle_ns: 440795239399 ns
[    0.352099] Calibrating delay loop (skipped), value calculated using timer frequency.. 5392.98 BogoMIPS (lpj=8983976)
[    0.352101] pid_max: default: 32768 minimum: 301
[    0.353659] LSM: Security Framework initializing
[    0.353664] Yama: becoming mindful.
[    0.357739] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[    0.359834] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.359919] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.359985] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.360150] *** VALIDATE proc ***
[    0.360211] *** VALIDATE cgroup1 ***
[    0.360213] *** VALIDATE cgroup2 ***
[    0.360260] LVT offset 1 assigned for vector 0xf9
[    0.360267] Last level iTLB entries: 4KB 512, 2MB 1024, 4MB 512
[    0.360268] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 512, 1GB 0
[    0.360271] Spectre V2 : Mitigation: Full AMD retpoline
[    0.360271] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[    0.360273] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp
[    0.360445] Freeing SMP alternatives memory: 36K
[    0.365428] smpboot: CPU0: AMD FX-7600P Radeon R7, 12 Compute Cores 4C+8G (family: 0x15, model: 0x30, stepping: 0x1)
[    0.382139] Performance Events: Fam15h core perfctr, AMD PMU driver.
[    0.382172] ... version:                0
[    0.382172] ... bit width:              48
[    0.382173] ... generic registers:      6
[    0.382174] ... value mask:             0000ffffffffffff
[    0.382174] ... max period:             00007fffffffffff
[    0.382175] ... fixed-purpose events:   0
[    0.382175] ... event mask:             000000000000003f
[    0.388790] rcu: Hierarchical SRCU implementation.
[    0.412183] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.418837] smp: Bringing up secondary CPUs ...
[    0.458849] x86: Booting SMP configuration:
[    0.458852] .... node  #0, CPUs:      #1 #2 #3
[    0.541063] smp: Brought up 1 node, 4 CPUs
[    0.541063] smpboot: Max logical packages: 1
[    0.541063] smpboot: Total of 4 processors activated (21570.94 BogoMIPS)
[    0.542467] devtmpfs: initialized
[    0.542467] x86/mm: Memory block size: 128MB
[    0.543504] PM: Registering ACPI NVS region [mem 0x6ce18000-0x6df25fff] (17883136 bytes)
[    0.543504] PM: Registering ACPI NVS region [mem 0x6e32f000-0x6e534fff] (2121728 bytes)
[    0.543504] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.543504] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.543504] pinctrl core: initialized pinctrl subsystem
[    0.543504] PM: RTC time: 06:03:55, date: 2019-07-15
[    0.543504] NET: Registered protocol family 16
[    0.545432] audit: initializing netlink subsys (disabled)
[    0.545447] audit: type=2000 audit(1563170634.216:1): state=initialized audit_enabled=0 res=1
[    0.545571] cpuidle: using governor ladder
[    0.545571] cpuidle: using governor menu
[    0.545571] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.545571] ACPI: bus type PCI registered
[    0.545571] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.545609] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.545613] PCI: not using MMCONFIG
[    0.545615] PCI: Using configuration type 1 for base access
[    0.545615] PCI: Using configuration type 1 for extended access
[    0.546985] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.546985] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.548908] ACPI: Added _OSI(Module Device)
[    0.548908] ACPI: Added _OSI(Processor Device)
[    0.548908] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.548908] ACPI: Added _OSI(Processor Aggregator Device)
[    0.548908] ACPI: Added _OSI(Linux-Dell-Video)
[    0.548908] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    0.548908] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    0.571509] ACPI: 7 ACPI AML tables successfully acquired and loaded
[    0.574551] ACPI: EC: EC started
[    0.574551] ACPI: EC: interrupt blocked
[    0.575866] ACPI: \: Used as first EC
[    0.575868] ACPI: \: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.575869] ACPI: EC: Boot ECDT EC used to handle transactions
[    0.579620] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.601148] ACPI: Interpreter enabled
[    0.601180] ACPI: (supports S0 S3 S4 S5)
[    0.601182] ACPI: Using IOAPIC for interrupt routing
[    0.601310] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.601375] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[    0.601395] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.601826] ACPI: Enabled 5 GPEs in block 00 to 1F
[    0.614705] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.614712] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI HPX-Type3]
[    0.615042] acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR]
[    0.615043] acpi PNP0A03:00: FADT indicates ASPM is unsupported, using BIOS configuration
[    0.615528] PCI host bridge to bus 0000:00
[    0.615531] pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
[    0.615532] pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
[    0.615535] pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
[    0.615536] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.615538] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.615539] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff window]
[    0.615541] pci_bus 0000:00: root bus resource [mem 0xb0000000-0xffffffff window]
[    0.615542] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.615552] pci 0000:00:00.0: [1022:1422] type 00 class 0x060000
[    0.615712] pci 0000:00:00.2: [1022:1423] type 00 class 0x080600
[    0.615874] pci 0000:00:01.0: [1002:130c] type 00 class 0x030000
[    0.615891] pci 0000:00:01.0: reg 0x10: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.615899] pci 0000:00:01.0: reg 0x18: [mem 0xd0800000-0xd0ffffff 64bit pref]
[    0.615904] pci 0000:00:01.0: reg 0x20: [io  0xf000-0xf0ff]
[    0.615910] pci 0000:00:01.0: reg 0x24: [mem 0xfeb00000-0xfeb3ffff]
[    0.615915] pci 0000:00:01.0: reg 0x30: [mem 0xfeb40000-0xfeb5ffff pref]
[    0.615918] pci 0000:00:01.0: enabling Extended Tags
[    0.615928] pci 0000:00:01.0: BAR 0: assigned to efifb
[    0.615960] pci 0000:00:01.0: supports D1 D2
[    0.615961] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
[    0.616071] pci 0000:00:01.1: [1002:1308] type 00 class 0x040300
[    0.616085] pci 0000:00:01.1: reg 0x10: [mem 0xfeb64000-0xfeb67fff 64bit]
[    0.616102] pci 0000:00:01.1: enabling Extended Tags
[    0.616132] pci 0000:00:01.1: supports D1 D2
[    0.616287] pci 0000:00:02.0: [1022:1424] type 00 class 0x060000
[    0.616402] pci 0000:00:02.1: [1022:1425] type 01 class 0x060400
[    0.616438] pci 0000:00:02.1: enabling Extended Tags
[    0.616528] pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
[    0.616711] pci 0000:00:03.0: [1022:1424] type 00 class 0x060000
[    0.616808] pci 0000:00:03.1: [1022:1426] type 01 class 0x060400
[    0.616842] pci 0000:00:03.1: enabling Extended Tags
[    0.616881] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
[    0.616982] pci 0000:00:03.2: [1022:1426] type 01 class 0x060400
[    0.617017] pci 0000:00:03.2: enabling Extended Tags
[    0.617055] pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
[    0.617216] pci 0000:00:04.0: [1022:1424] type 00 class 0x060000
[    0.617342] pci 0000:00:10.0: [1022:7814] type 00 class 0x0c0330
[    0.617370] pci 0000:00:10.0: reg 0x10: [mem 0xfeb6a000-0xfeb6bfff 64bit]
[    0.617475] pci 0000:00:10.0: PME# supported from D0 D3hot D3cold
[    0.617594] pci 0000:00:10.1: [1022:7814] type 00 class 0x0c0330
[    0.617622] pci 0000:00:10.1: reg 0x10: [mem 0xfeb68000-0xfeb69fff 64bit]
[    0.617727] pci 0000:00:10.1: PME# supported from D0 D3hot D3cold
[    0.617847] pci 0000:00:11.0: [1022:7801] type 00 class 0x010601
[    0.617866] pci 0000:00:11.0: reg 0x10: [io  0xf140-0xf147]
[    0.617875] pci 0000:00:11.0: reg 0x14: [io  0xf130-0xf133]
[    0.617883] pci 0000:00:11.0: reg 0x18: [io  0xf120-0xf127]
[    0.617891] pci 0000:00:11.0: reg 0x1c: [io  0xf110-0xf113]
[    0.617900] pci 0000:00:11.0: reg 0x20: [io  0xf100-0xf10f]
[    0.617908] pci 0000:00:11.0: reg 0x24: [mem 0xfeb70000-0xfeb707ff]
[    0.618120] pci 0000:00:12.0: [1022:7807] type 00 class 0x0c0310
[    0.618137] pci 0000:00:12.0: reg 0x10: [mem 0xfeb6f000-0xfeb6ffff]
[    0.618306] pci 0000:00:12.2: [1022:7808] type 00 class 0x0c0320
[    0.618325] pci 0000:00:12.2: reg 0x10: [mem 0xfeb6e000-0xfeb6e0ff]
[    0.618398] pci 0000:00:12.2: supports D1 D2
[    0.618399] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618503] pci 0000:00:13.0: [1022:7807] type 00 class 0x0c0310
[    0.618519] pci 0000:00:13.0: reg 0x10: [mem 0xfeb6d000-0xfeb6dfff]
[    0.618687] pci 0000:00:13.2: [1022:7808] type 00 class 0x0c0320
[    0.618706] pci 0000:00:13.2: reg 0x10: [mem 0xfeb6c000-0xfeb6c0ff]
[    0.618861] pci 0000:00:13.2: supports D1 D2
[    0.618862] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot D3cold
[    0.618972] pci 0000:00:14.0: [1022:780b] type 00 class 0x0c0500
[    0.619150] pci 0000:00:14.2: [1022:780d] type 00 class 0x040300
[    0.619172] pci 0000:00:14.2: reg 0x10: [mem 0xfeb60000-0xfeb63fff 64bit]
[    0.619235] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[    0.619328] pci 0000:00:14.3: [1022:780e] type 00 class 0x060100
[    0.619499] pci 0000:00:14.4: [1022:780f] type 01 class 0x060401
[    0.619657] pci 0000:00:18.0: [1022:141a] type 00 class 0x060000
[    0.619746] pci 0000:00:18.1: [1022:141b] type 00 class 0x060000
[    0.619836] pci 0000:00:18.2: [1022:141c] type 00 class 0x060000
[    0.619940] pci 0000:00:18.3: [1022:141d] type 00 class 0x060000
[    0.620020] pci 0000:00:18.4: [1022:141e] type 00 class 0x060000
[    0.620098] pci 0000:00:18.5: [1022:141f] type 00 class 0x060000
[    0.620327] pci 0000:01:00.0: [1002:6647] type 00 class 0x038000
[    0.620364] pci 0000:01:00.0: reg 0x10: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.620379] pci 0000:01:00.0: reg 0x18: [mem 0xd0000000-0xd07fffff 64bit pref]
[    0.620387] pci 0000:01:00.0: reg 0x20: [io  0xe000-0xe0ff]
[    0.620396] pci 0000:01:00.0: reg 0x24: [mem 0xfea00000-0xfea3ffff]
[    0.620405] pci 0000:01:00.0: reg 0x30: [mem 0xfea40000-0xfea5ffff pref]
[    0.620416] pci 0000:01:00.0: enabling Extended Tags
[    0.620509] pci 0000:01:00.0: supports D1 D2
[    0.620510] pci 0000:01:00.0: PME# supported from D1 D2 D3hot
[    0.620568] pci 0000:01:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s x8 link at 0000:00:02.1 (capable of 126.016 Gb/s with 8 GT/s x16 link)
[    0.620657] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.620661] pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
[    0.620664] pci 0000:00:02.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.620668] pci 0000:00:02.1:   bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
[    0.620749] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
[    0.620797] pci 0000:02:00.0: reg 0x10: [mem 0xfe900000-0xfe901fff 64bit]
[    0.621007] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.621190] pci 0000:00:03.1: PCI bridge to [bus 02]
[    0.621196] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.621266] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
[    0.621293] pci 0000:03:00.0: reg 0x10: [mem 0xfe815000-0xfe815fff]
[    0.621333] pci 0000:03:00.0: reg 0x30: [mem 0xfe800000-0xfe80ffff pref]
[    0.621425] pci 0000:03:00.0: supports D1 D2
[    0.621427] pci 0000:03:00.0: PME# supported from D1 D2 D3hot D3cold
[    0.621544] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
[    0.621573] pci 0000:03:00.1: reg 0x10: [io  0xd000-0xd0ff]
[    0.621599] pci 0000:03:00.1: reg 0x18: [mem 0xfe814000-0xfe814fff 64bit]
[    0.621617] pci 0000:03:00.1: reg 0x20: [mem 0xfe810000-0xfe813fff 64bit]
[    0.621710] pci 0000:03:00.1: supports D1 D2
[    0.621711] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[    0.621866] pci 0000:00:03.2: PCI bridge to [bus 03]
[    0.621870] pci 0000:00:03.2:   bridge window [io  0xd000-0xdfff]
[    0.621872] pci 0000:00:03.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.621900] pci_bus 0000:04: extended config space not accessible
[    0.621956] pci 0000:00:14.4: PCI bridge to [bus 04] (subtractive decode)
[    0.621965] pci 0000:00:14.4:   bridge window [io  0x0000-0x03af window] (subtractive decode)
[    0.621966] pci 0000:00:14.4:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
[    0.621967] pci 0000:00:14.4:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
[    0.621968] pci 0000:00:14.4:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
[    0.621970] pci 0000:00:14.4:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[    0.621971] pci 0000:00:14.4:   bridge window [mem 0x000c0000-0x000dffff window] (subtractive decode)
[    0.621972] pci 0000:00:14.4:   bridge window [mem 0xb0000000-0xffffffff window] (subtractive decode)
[    0.623711] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
[    0.623793] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
[    0.623878] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
[    0.623961] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
[    0.624028] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
[    0.624080] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
[    0.624132] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
[    0.624183] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
[    0.625439] ACPI: EC: interrupt unblocked
[    0.625439] ACPI: EC: event unblocked
[    0.625439] ACPI: \_SB_.PCI0.SBRG.EC0_: GPE=0x3, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[    0.625439] ACPI: \_SB_.PCI0.SBRG.EC0_: Boot DSDT EC used to handle transactions and events
[    0.625474] pci 0000:00:01.0: vgaarb: setting as boot VGA device
[    0.625474] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.625474] pci 0000:00:01.0: vgaarb: bridge control possible
[    0.625474] vgaarb: loaded
[    0.625626] ACPI: bus type USB registered
[    0.625640] usbcore: registered new interface driver usbfs
[    0.625647] usbcore: registered new interface driver hub
[    0.625674] usbcore: registered new device driver usb
[    0.625701] pps_core: LinuxPPS API ver. 1 registered
[    0.625702] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.625706] PTP clock support registered
[    0.625716] EDAC MC: Ver: 3.0.0
[    0.625863] Registered efivars operations
[    0.628818] PCI: Using ACPI for IRQ routing
[    0.639283] PCI: pci_cache_line_size set to 64 bytes
[    0.639470] e820: reserve RAM buffer [mem 0x6c9c8000-0x6fffffff]
[    0.639472] e820: reserve RAM buffer [mem 0x6ce18000-0x6fffffff]
[    0.639473] e820: reserve RAM buffer [mem 0x6e32f000-0x6fffffff]
[    0.639474] e820: reserve RAM buffer [mem 0x6e688000-0x6fffffff]
[    0.639475] e820: reserve RAM buffer [mem 0x6ec90000-0x6fffffff]
[    0.639476] e820: reserve RAM buffer [mem 0x6f400000-0x6fffffff]
[    0.639476] e820: reserve RAM buffer [mem 0x44f000000-0x44fffffff]
[    0.639623] NetLabel: Initializing
[    0.639624] NetLabel:  domain hash size = 128
[    0.639625] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.639639] NetLabel:  unlabeled traffic allowed by default
[    0.639691] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.639691] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
[    0.641033] clocksource: Switched to clocksource tsc-early
[    0.652995] VFS: Disk quotas dquot_6.6.0
[    0.653021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.653055] *** VALIDATE hugetlbfs ***
[    0.653117] pnp: PnP ACPI init
[    0.653322] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[    0.653328] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.653418] system 00:01: [mem 0x70000000-0xafffffff] has been reserved
[    0.653421] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.653508] system 00:02: [mem 0xfeb80000-0xfebfffff] could not be reserved
[    0.653512] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.653660] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.653786] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.653857] system 00:05: [io  0x04d0-0x04d1] has been reserved
[    0.653861] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.653937] pnp 00:06: Plug and Play ACPI device, IDs ETD0108 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    0.653994] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[    0.654312] system 00:08: [io  0x04d0-0x04d1] has been reserved
[    0.654313] system 00:08: [io  0x040b] has been reserved
[    0.654314] system 00:08: [io  0x04d6] has been reserved
[    0.654316] system 00:08: [io  0x0c00-0x0c01] has been reserved
[    0.654317] system 00:08: [io  0x0c14] has been reserved
[    0.654318] system 00:08: [io  0x0c50-0x0c51] has been reserved
[    0.654319] system 00:08: [io  0x0c52] has been reserved
[    0.654320] system 00:08: [io  0x0c6c] has been reserved
[    0.654322] system 00:08: [io  0x0c6f] has been reserved
[    0.654323] system 00:08: [io  0x0cd0-0x0cd1] has been reserved
[    0.654324] system 00:08: [io  0x0cd2-0x0cd3] has been reserved
[    0.654325] system 00:08: [io  0x0cd4-0x0cd5] has been reserved
[    0.654326] system 00:08: [io  0x0cd6-0x0cd7] has been reserved
[    0.654327] system 00:08: [io  0x0cd8-0x0cdf] has been reserved
[    0.654328] system 00:08: [io  0x0800-0x089f] has been reserved
[    0.654329] system 00:08: [io  0x0900-0x090f] has been reserved
[    0.654331] system 00:08: [io  0x0910-0x091f] has been reserved
[    0.654332] system 00:08: [io  0xfe00-0xfefe] has been reserved
[    0.654334] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved
[    0.654335] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved
[    0.654336] system 00:08: [mem 0xfed80000-0xfed8ffff] has been reserved
[    0.654338] system 00:08: [mem 0xfed61000-0xfed70fff] has been reserved
[    0.654339] system 00:08: [mem 0xfec10000-0xfec10fff] has been reserved
[    0.654341] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[    0.654344] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.655677] pnp: PnP ACPI: found 9 devices
[    0.662688] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.662719] pci 0000:00:02.1: PCI bridge to [bus 01]
[    0.662728] pci 0000:00:02.1:   bridge window [io  0xe000-0xefff]
[    0.662732] pci 0000:00:02.1:   bridge window [mem 0xfea00000-0xfeafffff]
[    0.662735] pci 0000:00:02.1:   bridge window [mem 0xc0000000-0xd07fffff 64bit pref]
[    0.662740] pci 0000:00:03.1: PCI bridge to [bus 02]
[    0.662744] pci 0000:00:03.1:   bridge window [mem 0xfe900000-0xfe9fffff]
[    0.662750] pci 0000:00:03.2: PCI bridge to [bus 03]
[    0.662752] pci 0000:00:03.2:   bridge window [io  0xd000-0xdfff]
[    0.662755] pci 0000:00:03.2:   bridge window [mem 0xfe800000-0xfe8fffff]
[    0.662761] pci 0000:00:14.4: PCI bridge to [bus 04]
[    0.662824] pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
[    0.662826] pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
[    0.662827] pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
[    0.662828] pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
[    0.662830] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.662831] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.662832] pci_bus 0000:00: resource 10 [mem 0xb0000000-0xffffffff window]
[    0.662833] pci_bus 0000:01: resource 0 [io  0xe000-0xefff]
[    0.662834] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
[    0.662835] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd07fffff 64bit pref]
[    0.662836] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
[    0.662837] pci_bus 0000:03: resource 0 [io  0xd000-0xdfff]
[    0.662838] pci_bus 0000:03: resource 1 [mem 0xfe800000-0xfe8fffff]
[    0.662840] pci_bus 0000:04: resource 4 [io  0x0000-0x03af window]
[    0.662841] pci_bus 0000:04: resource 5 [io  0x03e0-0x0cf7 window]
[    0.662842] pci_bus 0000:04: resource 6 [io  0x03b0-0x03df window]
[    0.662843] pci_bus 0000:04: resource 7 [io  0x0d00-0xffff window]
[    0.662844] pci_bus 0000:04: resource 8 [mem 0x000a0000-0x000bffff window]
[    0.662845] pci_bus 0000:04: resource 9 [mem 0x000c0000-0x000dffff window]
[    0.662846] pci_bus 0000:04: resource 10 [mem 0xb0000000-0xffffffff window]
[    0.663011] NET: Registered protocol family 2
[    0.663229] tcp_listen_portaddr_hash hash table entries: 8192 (order: 5, 131072 bytes)
[    0.663304] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.663622] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.663842] TCP: Hash tables configured (established 131072 bind 65536)
[    0.663904] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[    0.663981] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[    0.664172] NET: Registered protocol family 1
[    0.664180] NET: Registered protocol family 44
[    0.664197] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.691415] pci 0000:00:12.0: quirk_usb_early_handoff+0x0/0x713 took 25912 usecs
[    0.708078] pci 0000:00:12.2: quirk_usb_early_handoff+0x0/0x713 took 16253 usecs
[    0.708081] pci 0000:00:12.2: PME# does not work under D3, disabling it
[    0.784805] pci 0000:00:13.0: quirk_usb_early_handoff+0x0/0x713 took 74880 usecs
[    0.799056] pci 0000:00:13.2: quirk_usb_early_handoff+0x0/0x713 took 13868 usecs
[    0.799059] pci 0000:00:13.2: PME# does not work under D3, disabling it
[    0.799183] PCI: CLS 64 bytes, default 64
[    0.799240] Trying to unpack rootfs image as initramfs...
[    1.342612] Freeing initrd memory: 35720K
[    1.342631] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
[    1.342635] pci 0000:00:00.2: AMD-Vi: Applying ATS write check workaround
[    1.342798] pci 0000:00:00.2: can't derive routing for PCI INT A
[    1.342800] pci 0000:00:00.2: PCI INT A: not connected
[    1.342996] pci 0000:00:01.0: Adding to iommu group 0
[    1.343013] pci 0000:00:01.0: Using iommu direct mapping
[    1.343030] pci 0000:00:01.1: Adding to iommu group 0
[    1.343080] pci 0000:00:02.0: Adding to iommu group 1
[    1.343107] pci 0000:00:02.1: Adding to iommu group 1
[    1.343185] pci 0000:00:03.0: Adding to iommu group 2
[    1.343205] pci 0000:00:03.1: Adding to iommu group 2
[    1.343225] pci 0000:00:03.2: Adding to iommu group 2
[    1.343305] pci 0000:00:04.0: Adding to iommu group 3
[    1.343446] pci 0000:00:10.0: Adding to iommu group 4
[    1.343500] pci 0000:00:10.1: Adding to iommu group 4
[    1.343569] pci 0000:00:11.0: Adding to iommu group 5
[    1.343643] pci 0000:00:12.0: Adding to iommu group 6
[    1.343661] pci 0000:00:12.2: Adding to iommu group 6
[    1.343742] pci 0000:00:13.0: Adding to iommu group 7
[    1.343761] pci 0000:00:13.2: Adding to iommu group 7
[    1.343840] pci 0000:00:14.0: Adding to iommu group 8
[    1.343860] pci 0000:00:14.2: Adding to iommu group 8
[    1.343879] pci 0000:00:14.3: Adding to iommu group 8
[    1.343950] pci 0000:00:14.4: Adding to iommu group 9
[    1.344049] pci 0000:00:18.0: Adding to iommu group 10
[    1.344069] pci 0000:00:18.1: Adding to iommu group 10
[    1.344088] pci 0000:00:18.2: Adding to iommu group 10
[    1.344108] pci 0000:00:18.3: Adding to iommu group 10
[    1.344128] pci 0000:00:18.4: Adding to iommu group 10
[    1.344147] pci 0000:00:18.5: Adding to iommu group 10
[    1.344185] pci 0000:01:00.0: Adding to iommu group 1
[    1.344230] pci 0000:02:00.0: Adding to iommu group 2
[    1.344247] pci 0000:03:00.0: Adding to iommu group 2
[    1.344263] pci 0000:03:00.1: Adding to iommu group 2
[    1.344805] pci 0000:00:00.2: AMD-Vi: Found IOMMU cap 0x40
[    1.344807] pci 0000:00:00.2: AMD-Vi: Extended features (0x800090a52):
[    1.344808]  PPR GT IA PC
[    1.344810] AMD-Vi: Interrupt remapping enabled
[    1.345104] AMD-Vi: Lazy IO/TLB flushing enabled
[    1.346970] amd_uncore: AMD NB counters detected
[    1.347172] LVT offset 0 assigned for vector 0x400
[    1.347215] perf: AMD IBS detected (0x000001ff)
[    1.347220] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
[    1.347352] check: Scanning for low memory corruption every 60 seconds
[    1.348025] Initialise system trusted keyrings
[    1.348036] Key type blacklist registered
[    1.348110] workingset: timestamp_bits=41 max_order=22 bucket_order=0
[    1.349618] zbud: loaded
[    1.351902] Key type asymmetric registered
[    1.351904] Asymmetric key parser 'x509' registered
[    1.351921] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[    1.352016] io scheduler mq-deadline registered
[    1.352017] io scheduler kyber registered
[    1.352061] io scheduler bfq registered
[    1.352518] pcieport 0000:00:02.1: PME: Signaling with IRQ 25
[    1.352547] pcieport 0000:00:02.1: pciehp: Slot #0 AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise- Interlock- NoCompl+ LLActRep+
[    1.352966] pcieport 0000:00:03.1: PME: Signaling with IRQ 26
[    1.353200] pcieport 0000:00:03.2: PME: Signaling with IRQ 27
[    1.353319] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.353434] efifb: probing for efifb
[    1.353457] efifb: framebuffer at 0xb0000000, using 8128k, total 8128k
[    1.353458] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[    1.353459] efifb: scrolling: redraw
[    1.353460] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[    1.353651] fbcon: Deferring console take-over
[    1.353653] fb0: EFI VGA frame buffer device
[    1.353744] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    1.353754] ACPI: Power Button [PWRB]
[    1.353796] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    1.353802] ACPI: Lid Switch [LID]
[    1.353833] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.354397] ACPI: Sleep Button [SLPB]
[    1.354453] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    1.354544] ACPI: Power Button [PWRF]
[    1.354716] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[    1.355147] acpi device:03: registered as cooling_device0
[    1.355189] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/device:02/LNXVIDEO:00/input/input4
[    1.355365] ACPI: Video Device [VGA2] (multi-head: yes  rom: no  post: no)
[    1.362345] ACPI BIOS Error (bug): Could not resolve symbol [^^^PB2.VGA.AFN7], AE_NOT_FOUND (20190509/psargs-330)
[    1.362360] fbcon: Taking over console
[    1.362417] Console: switching to colour frame buffer device 240x67
[    1.364382] ACPI Error: Aborting method \_SB.PCI0.VGA.LCDD._BCM due to previous error (AE_NOT_FOUND) (20190509/psparse-529)
[    1.364391] ACPI Error: Evaluating _BCM failed (20190509/video-351)
[    1.364480] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input5
[    1.367539] ACPI Error: AE_NOT_FOUND, While resolving a named reference package element - \_PR_.C000 (20190509/dspkginit-438)
[    1.367589] ACPI: Invalid passive threshold
[    1.368105] thermal LNXTHERM:00: registered as thermal_zone0
[    1.368106] ACPI: Thermal Zone [THRM] (38 C)
[    1.368431] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    1.370183] usbcore: registered new interface driver usbserial_generic
[    1.370190] usbserial: USB Serial support registered for generic
[    1.370253] rtc_cmos 00:04: RTC can wake from S4
[    1.370405] rtc_cmos 00:04: registered as rtc0
[    1.370427] rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    1.370587] ledtrig-cpu: registered to indicate activity on CPUs
[    1.370864] NET: Registered protocol family 10
[    1.380902] Segment Routing with IPv6
[    1.380934] NET: Registered protocol family 17
[    1.381459] mce: Using 7 MCE banks
[    1.381489] RAS: Correctable Errors collector initialized.
[    1.381543] microcode: CPU0: patch_level=0x06003106
[    1.381583] microcode: CPU1: patch_level=0x06003106
[    1.381592] microcode: CPU2: patch_level=0x06003106
[    1.381602] microcode: CPU3: patch_level=0x06003106
[    1.381664] microcode: Microcode Update Driver: v2.2.
[    1.381682] sched_clock: Marking stable (1334525405, 47130872)->(1498279146, -116622869)
[    1.382021] registered taskstats version 1
[    1.382033] Loading compiled-in X.509 certificates
[    1.387663] Loaded X.509 cert 'Build time autogenerated kernel key: a13dba31a81855561a221e0f8af1f2996eb82ab9'
[    1.388000] zswap: loaded using pool lz4/z3fold
[    1.397914] Key type big_key registered
[    1.398437] PM:   Magic number: 11:280:64
[    1.398513] memory memory92: hash matches
[    1.398590] rtc_cmos 00:04: setting system clock to 2019-07-15T06:03:56 UTC (1563170636)
[    1.400630] Freeing unused decrypted memory: 2040K
[    1.401313] Freeing unused kernel image memory: 1600K
[    1.427875] Write protecting the kernel read-only data: 20480k
[    1.428810] Freeing unused kernel image memory: 2008K
[    1.428946] Freeing unused kernel image memory: 244K
[    1.436874] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[    1.436882] Run /init as init process
[    1.474552] Linux agpgart interface v0.103
[    1.502645] AMD-Vi: AMD IOMMUv2 driver by Joerg Roedel <jroedel@suse.de>
[    1.577767] [drm] amdgpu kernel modesetting enabled.
[    1.577800] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    1.578461] ATPX version 1, functions 0x00000003
[    1.578605] Parsing CRAT table with 1 nodes
[    1.578609] Creating topology SYSFS entries
[    1.578634] Topology: Add APU node [0x0:0x0]
[    1.578635] Finished initializing topology
[    1.578700] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 0: 0xb0000000 -> 0xbfffffff
[    1.578702] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0800000 -> 0xd0ffffff
[    1.578704] amdgpu 0000:00:01.0: remove_conflicting_pci_framebuffers: bar 5: 0xfeb00000 -> 0xfeb3ffff
[    1.578706] checking generic (b0000000 7f0000) vs hw (b0000000 10000000)
[    1.578707] fb0: switching to amdgpudrmfb from EFI VGA
[    1.578739] Console: switching to colour dummy device 80x25
[    1.578866] amdgpu 0000:00:01.0: vgaarb: deactivate vga console
[    1.579202] [drm] initializing kernel modesetting (KAVERI 0x1002:0x130C 0x1043:0x223D 0x00).
[    1.579212] [drm] register mmio base: 0xFEB00000
[    1.579213] [drm] register mmio size: 262144
[    1.579215] [drm] add ip block number 0 <cik_common>
[    1.579216] [drm] add ip block number 1 <gmc_v7_0>
[    1.579217] [drm] add ip block number 2 <cik_ih>
[    1.579218] [drm] add ip block number 3 <gfx_v7_0>
[    1.579219] [drm] add ip block number 4 <cik_sdma>
[    1.579219] [drm] add ip block number 5 <kv_dpm>
[    1.579221] [drm] add ip block number 6 <dce_v8_0>
[    1.579221] [drm] add ip block number 7 <uvd_v4_2>
[    1.579222] [drm] add ip block number 8 <vce_v2_0>
[    1.579294] ATOM BIOS: BR45818.001
[    1.579572] [drm] RAS INFO: ras initialized successfully, hardware ability[0] ras_mask[0]
[    1.579576] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    1.579583] amdgpu 0000:00:01.0: VRAM: 1024M 0x000000F400000000 - 0x000000F43FFFFFFF (1024M used)
[    1.579585] amdgpu 0000:00:01.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[    1.579590] [drm] Detected VRAM RAM=1024M, BAR=1024M
[    1.579591] [drm] RAM width 128bits UNKNOWN
[    1.579654] [TTM] Zone  kernel: Available graphics memory: 7695168 KiB
[    1.579655] [TTM] Zone   dma32: Available graphics memory: 2097152 KiB
[    1.579656] [TTM] Initializing pool allocator
[    1.579660] [TTM] Initializing DMA pool allocator
[    1.579682] pmd_set_huge: Cannot satisfy [mem 0x70000000-0x70200000] with a huge-page mapping due to MTRR override.
[    1.580066] [drm] amdgpu: 1024M of VRAM memory ready
[    1.580069] [drm] amdgpu: 3072M of GTT memory ready.
[    1.580091] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    1.580124] [drm] PCIE GART of 1024M enabled (table at 0x000000F4007E9000).
[    1.580188] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.580189] [drm] Driver supports precise vblank timestamp query.
[    1.580904] [drm] Internal thermal controller without fan control
[    1.580906] [drm] amdgpu: dpm initialized
[    1.584222] [drm] amdgpu atom DIG backlight initialized
[    1.584223] [drm] AMDGPU Display Connectors
[    1.584224] [drm] Connector 0:
[    1.584225] [drm]   DP-1
[    1.584225] [drm]   HPD2
[    1.584226] [drm]   DDC: 0x1950 0x1950 0x1951 0x1951 0x1952 0x1952 0x1953 0x1953
[    1.584227] [drm]   Encoders:
[    1.584227] [drm]     DFP1: INTERNAL_UNIPHY2
[    1.584228] [drm] Connector 1:
[    1.584228] [drm]   HDMI-A-1
[    1.584229] [drm]   HPD3
[    1.584230] [drm]   DDC: 0x1954 0x1954 0x1955 0x1955 0x1956 0x1956 0x1957 0x1957
[    1.584230] [drm]   Encoders:
[    1.584231] [drm]     DFP2: INTERNAL_UNIPHY2
[    1.584231] [drm] Connector 2:
[    1.584231] [drm]   eDP-1
[    1.584232] [drm]   HPD1
[    1.584233] [drm]   DDC: 0x194c 0x194c 0x194d 0x194d 0x194e 0x194e 0x194f 0x194f
[    1.584233] [drm]   Encoders:
[    1.584234] [drm]     LCD1: INTERNAL_UNIPHY
[    1.584349] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[    1.584858] [drm] Found VCE firmware Version: 50.10 Binary ID: 2
[    1.632571] [drm] UVD initialized successfully.
[    1.753628] [drm] VCE initialized successfully.
[    1.756204] kfd kfd: Allocated 3969056 bytes on gart
[    1.756217] Topology: Add APU node [0x130c:0x1002]
[    1.756361] kfd kfd: added device 1002:130c
[    2.302168] tsc: Refined TSC clocksource calibration: 2694.790 MHz
[    2.302220] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d804e6143, max_idle_ns: 440795298162 ns
[    2.302334] clocksource: Switched to clocksource tsc
[    2.551697] [drm] fb mappable at 0x70BD9000
[    2.551699] [drm] vram apper at 0x70000000
[    2.551700] [drm] size 8294400
[    2.551700] [drm] fb depth is 24
[    2.551701] [drm]    pitch is 7680
[    2.551916] fbcon: amdgpudrmfb (fb0) is primary device
[    5.547685] Console: switching to colour frame buffer device 240x67
[    5.551247] amdgpu 0000:00:01.0: fb0: amdgpudrmfb frame buffer device
[    5.608732] [drm] Initialized amdgpu 3.32.0 20150101 for 0000:00:01.0 on minor 0
[    5.608903] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 0: 0xc0000000 -> 0xcfffffff
[    5.608905] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 2: 0xd0000000 -> 0xd07fffff
[    5.608907] amdgpu 0000:01:00.0: remove_conflicting_pci_framebuffers: bar 5: 0xfea00000 -> 0xfea3ffff
[    5.608962] amdgpu 0000:01:00.0: enabling device (0000 -> 0003)
[    5.609254] [drm] initializing kernel modesetting (BONAIRE 0x1002:0x6647 0x1043:0x223D 0x00).
[    5.609271] [drm] register mmio base: 0xFEA00000
[    5.609272] [drm] register mmio size: 262144
[    5.609290] [drm] add ip block number 0 <cik_common>
[    5.609292] [drm] add ip block number 1 <gmc_v7_0>
[    5.609293] [drm] add ip block number 2 <cik_ih>
[    5.609294] [drm] add ip block number 3 <gfx_v7_0>
[    5.609295] [drm] add ip block number 4 <cik_sdma>
[    5.609297] [drm] add ip block number 5 <powerplay>
[    5.609298] [drm] add ip block number 6 <dce_v8_0>
[    5.609299] [drm] add ip block number 7 <uvd_v4_2>
[    5.609300] [drm] add ip block number 8 <vce_v2_0>
[    5.609302] amdgpu 0000:01:00.0: kfd not supported on this ASIC
[    5.609322] vga_switcheroo: enabled
[    5.730804] ATOM BIOS: BR45817.001
[    5.730834] [drm] GPU posting now...
[    5.737165] [drm] RAS INFO: ras initialized successfully, hardware ability[0] ras_mask[0]
[    5.737215] [drm] vm size is 64 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
[    5.737281] amdgpu 0000:01:00.0: VRAM: 4096M 0x000000F400000000 - 0x000000F4FFFFFFFF (4096M used)
[    5.737283] amdgpu 0000:01:00.0: GART: 1024M 0x000000FF00000000 - 0x000000FF3FFFFFFF
[    5.737297] [drm] Detected VRAM RAM=4096M, BAR=256M
[    5.737299] [drm] RAM width 128bits GDDR5
[    5.737322] [drm] amdgpu: 4096M of VRAM memory ready
[    5.737334] [drm] amdgpu: 4096M of GTT memory ready.
[    5.737376] [drm] GART: num cpu pages 262144, num gpu pages 262144
[    5.737853] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[    5.737986] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.737987] [drm] Driver supports precise vblank timestamp query.
[    5.739190] [drm] AMDGPU Display Connectors
[    5.739317] [drm] Found UVD firmware Version: 1.64 Family ID: 9
[    5.740250] [drm] Found VCE firmware Version: 50.10 Binary ID: 2
[    5.741019] [drm] enabling PCIE gen 3 link speeds, disable with amdgpu.pcie_gen2=0
[    7.338959] [drm] UVD initialized successfully.
[    7.460006] [drm] VCE initialized successfully.
[    7.472286] [drm] Initialized amdgpu 3.32.0 20150101 for 0000:01:00.0 on minor 1
[    7.503166] [drm] radeon kernel modesetting enabled.
[    7.503198] vga_switcheroo: detected switching method \_SB_.PCI0.VGA_.ATPX handle
[    7.504470] ATPX version 1, functions 0x00000003
[    7.567417] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    7.572803] i8042: Detected active multiplexing controller, rev 1.1
[    7.576099] serio: i8042 KBD port at 0x60,0x64 irq 1
[    7.576158] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    7.576194] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    7.576225] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    7.576259] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    7.579994] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    7.584205] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    7.584206] Warning! ehci_hcd should always be loaded before uhci_hcd and ohci_hcd, not after
[    7.585220] cryptd: max_cpu_qlen set to 1000
[    7.586621] ehci-pci: EHCI PCI platform driver
[    7.586960] QUIRK: Enable AMD PLL fix
[    7.586994] ehci-pci 0000:00:12.2: EHCI Host Controller
[    7.587001] ehci-pci 0000:00:12.2: new USB bus registered, assigned bus number 1
[    7.587007] ehci-pci 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    7.587017] ehci-pci 0000:00:12.2: debug port 1
[    7.587072] ehci-pci 0000:00:12.2: irq 17, io mem 0xfeb6e000
[    7.587865] SCSI subsystem initialized
[    7.592541] rtsx_pci 0000:03:00.0: enabling device (0000 -> 0002)
[    7.600866] ehci-pci 0000:00:12.2: USB 2.0 started, EHCI 1.00
[    7.600956] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    7.600959] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.600961] usb usb1: Product: EHCI Host Controller
[    7.600963] usb usb1: Manufacturer: Linux 5.2.0-zen1-1-zen ehci_hcd
[    7.600965] usb usb1: SerialNumber: 0000:00:12.2
[    7.601165] hub 1-0:1.0: USB hub found
[    7.601176] hub 1-0:1.0: 5 ports detected
[    7.602634] AVX version of gcm_enc/dec engaged.
[    7.602635] AES CTR mode by8 optimization enabled
[    7.603798] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    7.603811] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[    7.604002] xhci_hcd 0000:00:10.0: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
[    7.604457] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    7.604460] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.604462] usb usb2: Product: xHCI Host Controller
[    7.604463] usb usb2: Manufacturer: Linux 5.2.0-zen1-1-zen xhci-hcd
[    7.604465] usb usb2: SerialNumber: 0000:00:10.0
[    7.604662] hub 2-0:1.0: USB hub found
[    7.604737] hub 2-0:1.0: 2 ports detected
[    7.605003] xhci_hcd 0000:00:10.0: xHCI Host Controller
[    7.605009] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 3
[    7.605014] xhci_hcd 0000:00:10.0: Host supports USB 3.0 SuperSpeed
[    7.605018] ehci-pci 0000:00:13.2: EHCI Host Controller
[    7.605027] ehci-pci 0000:00:13.2: new USB bus registered, assigned bus number 4
[    7.605033] ehci-pci 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[    7.605066] ehci-pci 0000:00:13.2: debug port 1
[    7.605236] ehci-pci 0000:00:13.2: irq 17, io mem 0xfeb6c000
[    7.607530] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.607569] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    7.607571] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.607573] usb usb3: Product: xHCI Host Controller
[    7.607574] usb usb3: Manufacturer: Linux 5.2.0-zen1-1-zen xhci-hcd
[    7.607576] usb usb3: SerialNumber: 0000:00:10.0
[    7.607688] libata version 3.00 loaded.
[    7.607970] hub 3-0:1.0: USB hub found
[    7.608045] hub 3-0:1.0: 2 ports detected
[    7.611673] ahci 0000:00:11.0: version 3.0
[    7.613954] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
[    7.613958] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part sxs 
[    7.615513] ehci-pci 0000:00:13.2: USB 2.0 started, EHCI 1.00
[    7.615586] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    7.615588] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.615591] usb usb4: Product: EHCI Host Controller
[    7.615592] usb usb4: Manufacturer: Linux 5.2.0-zen1-1-zen ehci_hcd
[    7.615594] usb usb4: SerialNumber: 0000:00:13.2
[    7.617087] hub 4-0:1.0: USB hub found
[    7.617098] hub 4-0:1.0: 5 ports detected
[    7.620000] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    7.620009] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 5
[    7.620051] ohci-pci: OHCI PCI platform driver
[    7.620265] ohci-pci 0000:00:12.0: OHCI PCI host controller
[    7.620274] ohci-pci 0000:00:12.0: new USB bus registered, assigned bus number 6
[    7.620283] xhci_hcd 0000:00:10.1: hcc params 0x014040c3 hci version 0x100 quirks 0x0000000000000418
[    7.620332] ohci-pci 0000:00:12.0: irq 18, io mem 0xfeb6f000
[    7.620678] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.02
[    7.620680] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.620682] usb usb5: Product: xHCI Host Controller
[    7.620684] usb usb5: Manufacturer: Linux 5.2.0-zen1-1-zen xhci-hcd
[    7.620685] usb usb5: SerialNumber: 0000:00:10.1
[    7.620858] hub 5-0:1.0: USB hub found
[    7.620932] hub 5-0:1.0: 2 ports detected
[    7.621185] xhci_hcd 0000:00:10.1: xHCI Host Controller
[    7.621190] xhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 7
[    7.621195] xhci_hcd 0000:00:10.1: Host supports USB 3.0 SuperSpeed
[    7.624396] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM.
[    7.624439] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 5.02
[    7.624441] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.624443] usb usb7: Product: xHCI Host Controller
[    7.624445] usb usb7: Manufacturer: Linux 5.2.0-zen1-1-zen xhci-hcd
[    7.624447] usb usb7: SerialNumber: 0000:00:10.1
[    7.626411] hub 7-0:1.0: USB hub found
[    7.626533] hub 7-0:1.0: 2 ports detected
[    7.646036] scsi host0: ahci
[    7.647644] scsi host1: ahci
[    7.647948] scsi host2: ahci
[    7.648723] scsi host3: ahci
[    7.649138] scsi host4: ahci
[    7.649324] scsi host5: ahci
[    7.649455] ata1: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70100 irq 39
[    7.649458] ata2: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70180 irq 40
[    7.649461] ata3: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70200 irq 41
[    7.649464] ata4: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70280 irq 42
[    7.649467] ata5: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70300 irq 43
[    7.649470] ata6: SATA max UDMA/133 abar m2048@0xfeb70000 port 0xfeb70380 irq 44
[    7.659036] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[    7.682949] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    7.682952] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.682954] usb usb6: Product: OHCI PCI host controller
[    7.682955] usb usb6: Manufacturer: Linux 5.2.0-zen1-1-zen ohci_hcd
[    7.682956] usb usb6: SerialNumber: 0000:00:12.0
[    7.683333] hub 6-0:1.0: USB hub found
[    7.683377] hub 6-0:1.0: 5 ports detected
[    7.684687] ohci-pci 0000:00:13.0: OHCI PCI host controller
[    7.684693] ohci-pci 0000:00:13.0: new USB bus registered, assigned bus number 8
[    7.684724] ohci-pci 0000:00:13.0: irq 18, io mem 0xfeb6d000
[    7.742918] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.02
[    7.742921] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.742922] usb usb8: Product: OHCI PCI host controller
[    7.742923] usb usb8: Manufacturer: Linux 5.2.0-zen1-1-zen ohci_hcd
[    7.742924] usb usb8: SerialNumber: 0000:00:13.0
[    7.743217] hub 8-0:1.0: USB hub found
[    7.743252] hub 8-0:1.0: 5 ports detected
[    7.932200] usb 1-5: new high-speed USB device number 2 using ehci-pci
[    7.948951] usb 5-1: new full-speed USB device number 2 using xhci_hcd
[    7.963009] ata5: SATA link down (SStatus 0 SControl 300)
[    7.963043] ata6: SATA link down (SStatus 0 SControl 300)
[    7.963067] ata3: SATA link down (SStatus 0 SControl 300)
[    7.963098] ata4: SATA link down (SStatus 0 SControl 300)
[    8.113606] usb 1-5: New USB device found, idVendor=04f2, idProduct=b3fd, bcdDevice=69.54
[    8.113610] usb 1-5: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[    8.113611] usb 1-5: Product: USB2.0 HD UVC WebCam
[    8.113613] usb 1-5: Manufacturer: Chicony Electronics Co.,Ltd.
[    8.113614] usb 1-5: SerialNumber: 0x0001
[    8.114749] usb 5-1: New USB device found, idVendor=09da, idProduct=010e, bcdDevice= 0.01
[    8.114751] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    8.114753] usb 5-1: Product:            2.4G Wireless Mouse
[    8.114754] usb 5-1: Manufacturer:           
[    8.115471] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    8.116684] ata1.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
[    8.116687] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[    8.118093] ata1.00: configured for UDMA/133
[    8.118406] scsi 0:0:0:0: Direct-Access     ATA      HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
[    8.122207] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    8.125151] hidraw: raw HID events driver (C) Jiri Kosina
[    8.126854] ata2.00: ATAPI: HL-DT-ST DVDRAM GUE0N, T.02, max UDMA/33
[    8.128923] ata2.00: configured for UDMA/33
[    8.132957] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GUE0N     T.02 PQ: 0 ANSI: 5
[    8.142318] usbcore: registered new interface driver usbhid
[    8.142320] usbhid: USB HID core driver
[    8.177485] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[    8.177487] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    8.177538] sd 0:0:0:0: [sda] Write Protect is off
[    8.177540] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.177562] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.226193] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    8.226197] cdrom: Uniform CD-ROM driver Revision: 3.20
[    8.226675] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    8.228913] usb 8-1: new full-speed USB device number 2 using ohci-pci
[    8.285899]  sda: sda1 sda2 sda3
[    8.286682] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.413390] usb 8-1: New USB device found, idVendor=8087, idProduct=07dc, bcdDevice= 0.01
[    8.413393] usb 8-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    8.554383] random: fast init done
[    8.582667] device-mapper: uevent: version 1.0.3
[    8.582803] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[   15.876416] amdgpu: [powerplay] VI should always have 2 performance levels
[   16.307765] amdgpu 0000:01:00.0: GPU pci config reset
[   17.974207] random: crng init done
[   24.751464] NET: Registered protocol family 38
[   25.825433] raid6: sse2x4   gen() 11505 MB/s
[   25.882097] raid6: sse2x4   xor()  5828 MB/s
[   25.938813] raid6: sse2x2   gen() 10065 MB/s
[   25.995429] raid6: sse2x2   xor()  7174 MB/s
[   26.052123] raid6: sse2x1   gen()  6900 MB/s
[   26.108763] raid6: sse2x1   xor()  4894 MB/s
[   26.108764] raid6: using algorithm sse2x4 gen() 11505 MB/s
[   26.108764] raid6: .... xor() 5828 MB/s, rmw enabled
[   26.108766] raid6: using ssse3x2 recovery algorithm
[   26.110104] xor: automatically using best checksumming function   avx       
[   26.153531] Btrfs loaded, crc32c=crc32c-intel
[   26.154305] BTRFS: device fsid fefa11ff-166d-48a9-954e-24ad5bc7582d devid 1 transid 57547 /dev/dm-1
[   26.154560] BTRFS: device fsid f49b2178-af84-4916-bee7-e21622d6ecf6 devid 1 transid 76679 /dev/dm-3
[   26.261640] BTRFS info (device dm-1): disk space caching is enabled
[   26.261642] BTRFS info (device dm-1): has skinny extents
[   26.349727] BTRFS info (device dm-1): bdev /dev/mapper/ALi-lv_root errs: wr 0, rd 10, flush 0, corrupt 0, gen 0
[   28.101436] systemd[1]: systemd 242.32-3-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
[   28.115849] systemd[1]: Detected architecture x86-64.
[   28.128988] systemd[1]: Set hostname to <Pakrohk>.
[   28.964668] systemd[1]: Created slice system-getty.slice.
[   28.965456] systemd[1]: Listening on udev Control Socket.
[   28.965525] systemd[1]: Reached target Login Prompts.
[   28.965625] systemd[1]: Listening on udev Kernel Socket.
[   28.969047] systemd[1]: Listening on LVM2 metadata daemon socket.
[   28.969272] systemd[1]: Listening on initctl Compatibility Named Pipe.
[   28.969542] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   29.139496] acpi_call: loading out-of-tree module taints kernel.
[   29.139537] acpi_call: module verification failed: signature and/or required key missing - tainting kernel
[   29.156971] BTRFS info (device dm-1): disk space caching is enabled
[   29.492263] audit: type=1130 audit(1563170664.590:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   29.557508] systemd-journald[435]: Received request to flush runtime journal from PID 1
[   29.574855] audit: type=1130 audit(1563170664.670:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.352787] audit: type=1130 audit(1563170665.450:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.503389] acpi_cpufreq: overriding BIOS provided _PSD data
[   30.507397] ACPI: AC Adapter [AC0] (on-line)
[   30.609239] input: PC Speaker as /devices/platform/pcspkr/input/input11
[   30.691777] audit: type=1130 audit(1563170665.787:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@backlight:amdgpu_bl0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   30.766595] battery: ACPI: Battery Slot [BAT0] (battery present)
[   31.339193] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x381fa2)
[   31.355814] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[   31.370351] psmouse serio4: elantech: Elan sample query result 05, 1b, 64
[   31.387889] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   31.395119] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   31.439961] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input15
[   31.455913] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   31.455922] cfg80211: failed to load regulatory.db
[   31.465327] mousedev: PS/2 mouse device common for all mice
[   31.610005] asus_wmi: ASUS WMI generic driver loaded
[   31.612380] asus_wmi: Initialization: 0x1
[   31.612434] asus_wmi: BIOS WMI version: 0.0
[   31.612504] asus_wmi: SFUN value: 0x4a0077
[   31.614207] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[   31.641333] asus_wmi: Number of fans: 1
[   31.642538] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input17
[   31.683868] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\SBSM) (20190509/utaddress-204)
[   31.683877] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[   31.781158] input:                       2.4G Wireless Mouse as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.0/0003:09DA:010E.0001/input/input18
[   31.781303] input:                       2.4G Wireless Mouse as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.0/0003:09DA:010E.0001/input/input19
[   31.835806] hid-generic 0003:09DA:010E.0001: input,hiddev0,hidraw0: USB HID v1.11 Mouse [                      2.4G Wireless Mouse] on usb-0000:00:10.1-1/input0
[   31.836854] input:                       2.4G Wireless Mouse Keyboard as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.1/0003:09DA:010E.0002/input/input20
[   31.838558] audit: type=1130 audit(1563170666.933:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-backlight@leds:asus::kbd_backlight comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   31.849681] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
[   31.849879] sp5100-tco sp5100-tco: Using 0xfed80b00 for watchdog MMIO address
[   31.849997] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
[   31.892663] input:                       2.4G Wireless Mouse Consumer Control as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.1/0003:09DA:010E.0002/input/input21
[   31.892770] input:                       2.4G Wireless Mouse System Control as /devices/pci0000:00/0000:00:10.1/usb5/5-1/5-1:1.1/0003:09DA:010E.0002/input/input22
[   31.892857] hid-generic 0003:09DA:010E.0002: input,hidraw1: USB HID v1.11 Keyboard [                      2.4G Wireless Mouse] on usb-0000:00:10.1-1/input1
[   31.904641] Intel(R) Wireless WiFi driver for Linux
[   31.904644] Copyright(c) 2003- 2015 Intel Corporation
[   31.904753] iwlwifi 0000:02:00.0: enabling device (0000 -> 0002)
[   31.906947] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
[   31.917679] libphy: r8169: probed
[   31.917902] r8169 0000:03:00.1 eth0: RTL8411, 08:62:66:b5:f8:28, XID 5c8, IRQ 55
[   31.917905] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[   31.919621] r8169 0000:03:00.1 enp3s0f1: renamed from eth0
[   32.012814] media: Linux media interface: v0.10
[   32.037423] videodev: Linux video capture interface: v2.00
[   32.092785] Bluetooth: Core ver 2.22
[   32.093085] NET: Registered protocol family 31
[   32.093087] Bluetooth: HCI device and connection manager initialized
[   32.093093] Bluetooth: HCI socket layer initialized
[   32.093096] Bluetooth: L2CAP socket layer initialized
[   32.093101] Bluetooth: SCO socket layer initialized
[   32.120036] iwlwifi 0000:02:00.0: loaded firmware version 17.3216344376.0 op_mode iwlmvm
[   32.247970] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[   32.268035] iwlwifi 0000:02:00.0: base HW address: ac:fd:ce:60:1f:d5
[   32.425811] usbcore: registered new interface driver btusb
[   32.440087] Bluetooth: hci0: read Intel version: 3707100180012d0d00
[   32.504941] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.1.2d.d.bseq
[   32.524144] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[   32.526814] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[   32.550096] audit: type=1130 audit(1563170667.647:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   32.556206] snd_hda_intel 0000:00:01.1: enabling device (0000 -> 0002)
[   32.556381] snd_hda_intel 0000:00:01.1: Force to non-snoop mode
[   32.591190] uvcvideo: Found UVC 1.00 device USB2.0 HD UVC WebCam (04f2:b3fd)
[   32.595760] uvcvideo 1-5:1.0: Entity type for entity Extension 4 was not initialized!
[   32.595766] uvcvideo 1-5:1.0: Entity type for entity Processing 2 was not initialized!
[   32.595768] uvcvideo 1-5:1.0: Entity type for entity Camera 1 was not initialized!
[   32.596570] input: USB2.0 HD UVC WebCam: USB2.0 HD as /devices/pci0000:00/0000:00:12.2/usb1/1-5/1-5:1.0/input/input23
[   32.596668] usbcore: registered new interface driver uvcvideo
[   32.596670] USB Video Class driver (1.1.1)
[   32.603511] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input24
[   32.603584] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input25
[   32.721090] Bluetooth: hci0: unexpected event for opcode 0xfc2f
[   32.741122] Bluetooth: hci0: Intel firmware patch completed and activated
[   32.783049] snd_hda_codec_realtek hdaudioC1D0: autoconfig for ALC668: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[   32.783053] snd_hda_codec_realtek hdaudioC1D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[   32.783055] snd_hda_codec_realtek hdaudioC1D0:    hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[   32.783061] snd_hda_codec_realtek hdaudioC1D0:    mono: mono_out=0x0
[   32.783062] snd_hda_codec_realtek hdaudioC1D0:    inputs:
[   32.783064] snd_hda_codec_realtek hdaudioC1D0:      Mic=0x12
[   32.796912] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input26
[   32.808268] Adding 4194300k swap on /dev/mapper/ALi-lv_swap.  Priority:-2 extents:1 across:4194300k FS
[   32.950410] kvm: Nested Virtualization enabled
[   32.950415] kvm: Nested Paging enabled
[   32.968348] MCE: In-kernel MCE decoding enabled.
[   33.073800] EDAC amd64: Node 0: DRAM ECC disabled.
[   33.073804] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
                Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
                (Note that use of the override may cause unknown side effects.)
[   33.301268] BTRFS info (device dm-1): device fsid fefa11ff-166d-48a9-954e-24ad5bc7582d devid 1 moved old:/dev/mapper/ALi-lv_root new:/dev/dm-1
[   33.302356] BTRFS info (device dm-1): device fsid fefa11ff-166d-48a9-954e-24ad5bc7582d devid 1 moved old:/dev/dm-1 new:/dev/mapper/ALi-lv_root
[   33.331036] audit: type=1130 audit(1563170668.427:8): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.381479] BTRFS info (device dm-3): disk space caching is enabled
[   33.381483] BTRFS info (device dm-3): has skinny extents
[   33.436785] audit: type=1130 audit(1563170668.533:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-pvscan@254:0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.661798] audit: type=1130 audit(1563170668.757:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-F272\x2d99A4 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   33.953460] audit: type=1130 audit(1563170669.050:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-fsck@dev-disk-by\x2duuid-6cc8711c\x2da040\x2d415c\x2db834\x2dc6979389f7f8 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   36.931320] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: stripe=4
[   37.319661] audit: type=1130 audit(1563170672.417:12): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.357282] audit: type=1127 audit(1563170672.453:13): pid=605 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
[   37.400376] audit: type=1130 audit(1563170672.497:14): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.542059] audit: type=1131 audit(1563170672.637:15): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.858276] audit: type=1130 audit(1563170672.953:16): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   37.895881] audit: type=1130 audit(1563170672.993:17): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.678045] audit: type=1130 audit(1563170673.773:18): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=wpa_supplicant comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.680447] audit: type=1130 audit(1563170673.777:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=bluetooth comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   38.791961] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   38.791964] Bluetooth: BNEP filters: protocol multicast
[   38.791971] Bluetooth: BNEP socket layer initialized
[   38.899835] audit: type=1130 audit(1563170673.997:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   39.046403] audit: type=1130 audit(1563170674.143:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   40.284578] Generic Realtek PHY r8169-301:00: attached PHY driver [Generic Realtek PHY] (mii_bus:phy_addr=r8169-301:00, irq=IGNORE)
[   40.399764] r8169 0000:03:00.1 enp3s0f1: Link is Down
[   40.452831] [drm] enabling PCIE gen 3 link speeds, disable with amdgpu.pcie_gen2=0
[   42.014848] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[   42.062766] [drm] UVD initialized successfully.
[   42.183796] [drm] VCE initialized successfully.
[   48.122368] kauditd_printk_skb: 5 callbacks suppressed
[   48.122372] audit: type=1130 audit(1563170683.220:27): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   48.135324] audit: type=1006 audit(1563170683.230:28): pid=673 uid=0 old-auid=4294967295 auid=975 tty=(none) old-ses=4294967295 ses=1 res=1
[   48.292532] audit: type=1130 audit(1563170683.390:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   50.059942] audit: type=1131 audit(1563170685.157:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   52.561770] amdgpu: [powerplay] VI should always have 2 performance levels
[   52.992865] amdgpu 0000:01:00.0: GPU pci config reset
[   56.976434] audit: type=1006 audit(1563170692.073:31): pid=699 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[   57.011150] audit: type=1130 audit(1563170692.107:32): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   57.019871] audit: type=1006 audit(1563170692.117:33): pid=703 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[   57.077676] audit: type=1130 audit(1563170692.173:34): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@1000 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   64.868017] audit: type=1130 audit(1563170699.963:35): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   66.261734] audit: type=1130 audit(1563170701.357:36): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   67.098721] audit: type=1131 audit(1563170702.193:37): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   67.111548] audit: type=1131 audit(1563170702.207:38): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@975 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   69.308127] audit: type=1131 audit(1563170704.403:39): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-hostnamed comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   69.614258] audit: type=1130 audit(1563170704.710:40): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[   78.226378] Bluetooth: RFCOMM TTY layer initialized
[   78.226389] Bluetooth: RFCOMM socket layer initialized
[   78.226400] Bluetooth: RFCOMM ver 1.11
[   96.948720] audit: type=1130 audit(1563170732.043:41): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  100.281873] wlp2s0: authenticate with 90:94:e4:83:3f:2d
[  100.284966] wlp2s0: send auth to 90:94:e4:83:3f:2d (try 1/3)
[  100.287175] wlp2s0: authenticated
[  100.288802] wlp2s0: associate with 90:94:e4:83:3f:2d (try 1/3)
[  100.292969] wlp2s0: RX AssocResp from 90:94:e4:83:3f:2d (capab=0x411 status=0 aid=2)
[  100.295117] wlp2s0: associated
[  101.130707] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[  107.055844] audit: type=1131 audit(1563170742.150:42): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=NetworkManager-dispatcher comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  175.457664] fuse: init (API version 7.31)
[  941.481193] audit: type=1130 audit(1563171576.489:43): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[  941.481199] audit: type=1131 audit(1563171576.489:44): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4838.388831] [drm] enabling PCIE gen 3 link speeds, disable with amdgpu.pcie_gen2=0
[ 4839.955200] [drm] PCIE GART of 1024M enabled (table at 0x000000F400000000).
[ 4840.003280] [drm] UVD initialized successfully.
[ 4840.124312] [drm] VCE initialized successfully.
[ 4846.355392] amdgpu: [powerplay] VI should always have 2 performance levels
[ 4846.811717] amdgpu 0000:01:00.0: GPU pci config reset

تنظیمات grub

# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="cryptdevice=UUID=cdad3f38-55f8-4052-b33b-14353bb7576b:ALi root=/dev/mapper/ALi-lv_root rw  radeon.cik_support=0 amdgpu.cik_support=1 "
GRUB_CMDLINE_LINUX=""

CONFIG_DRM_AMDGPU_CIK=y
# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
GRUB_ENABLE_CRYPTODISK=y

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
#GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=auto

# Uncomment to allow the kernel use the same resolution used by grub
GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
#GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"

آخرین ویرایش توسط ALipAkrohk (2019-07-16 12:29:58)


20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

#11 2019-07-15 12:16:41

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

پاسخ: کمک برای گذارش مشکل گرافیک amd

morealaz نوشته است که:

مدل کارت گرافیک شما R9 M280X و طبق چیزی که در AMD_Radeon_Rx_200_series#Mobile_models دیدم این کارت از نسل GCN 2 هست. طبق گفته ویکی در صفحه Xorg#AMD برای این نسل کارت گرافیک یا میتونید از درایورهای آزاد AMDGPU و یا ATI استفاده کنید و یا از درایور بسته Catalyst ولی از AMDGPU PRO نمیشه استفاده کرد. درایور Catalyst توصیه نمیشه و طبق ویکی آرچ ارجحیت خاصی هم نداره. در مورد درایور AMDGPU هم عبارت experimental یا آزمایشی بیان شده. آیا شما درایور ATI رو هم امتحان کردید؟

نه متاسفانه استفاده نکردم، تست می کنم و اطلاع میدم.


20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

#12 2019-07-16 12:28:42

ALipAkrohk
عضو
از : بوشهر
ثبت شده: 2017-09-07
ارسال ها: 51

پاسخ: کمک برای گذارش مشکل گرافیک amd

ALipAkrohk نوشته است که:
morealaz نوشته است که:

مدل کارت گرافیک شما R9 M280X و طبق چیزی که در AMD_Radeon_Rx_200_series#Mobile_models دیدم این کارت از نسل GCN 2 هست. طبق گفته ویکی در صفحه Xorg#AMD برای این نسل کارت گرافیک یا میتونید از درایورهای آزاد AMDGPU و یا ATI استفاده کنید و یا از درایور بسته Catalyst ولی از AMDGPU PRO نمیشه استفاده کرد. درایور Catalyst توصیه نمیشه و طبق ویکی آرچ ارجحیت خاصی هم نداره. در مورد درایور AMDGPU هم عبارت experimental یا آزمایشی بیان شده. آیا شما درایور ATI رو هم امتحان کردید؟

نه متاسفانه استفاده نکردم، تست می کنم و اطلاع میدم.

خوب من این درایور رو تست کردم و عجیب اینه که بعد از فعال سازی radeon درایور دیگه محیط گرافیکی نمی تونه لود بشه.


20 =! 20
با هم بیاموزیم به هم نیاموزیم.
پاک روح.(آپاراک).

آفلاین

پانوشت انجمن

پشتیبانی توسط تیم آرچ لینوکس ایران و نیرو گرفته با FluxBB